-----Original Message----- From: Shawn Guo [mailto:shawnguo@xxxxxxxxxx] Sent: Friday, September 22, 2017 2:55 PM To: Yinbo Zhu <yinbo.zhu@xxxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx>; Catalin Marinas ) <catalin.marinas@xxxxxxx>; Will Deacon ) <will.deacon@xxxxxxx>; Harninder Rai <harninder.rai@xxxxxxx>; Raghav Dogra <raghav.dogra@xxxxxxx>; Ashish Kumar <ashish.kumar@xxxxxxx>; Andy Tang <andy.tang@xxxxxxx>; open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS <devicetree@xxxxxxxxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; open list <linux-kernel@xxxxxxxxxxxxxxx> Subject: Re: [PATCH v2] arm64: dts: ls1088a: Add USB support On Wed, Sep 13, 2017 at 05:10:09PM +0800, yinbo.zhu@xxxxxxx wrote: > From: "yinbo.zhu" <yinbo.zhu@xxxxxxx> > > Fix the issue that usb is not detected on ls1088ardb It's not really about fixing issue but adding support. The patch had been tested on upstream 4.14 code, it can fix the issue. > > Signed-off-by: yinbo.zhu <yinbo.zhu@xxxxxxx> > Signed-off-by: Ran Wang <ran.wang_1@xxxxxxx> > --- You should better have a version history here to tell what's changed between version. I will add a version history on next v3 patch > arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++ > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 20 ++++++++++++++++++++ > 2 files changed, 28 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > index 213abb72de93..6c3c3bc4b681 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > @@ -118,6 +118,14 @@ > status = "okay"; > }; > > +&usb0 { > + status = "okay"; > +}; > + > +&usb1 { > + status = "okay"; > +}; > + > &esdhc { Please sort these labeled nodes alphabetically. Shawn > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > index c144d06a6e33..c23fede8cf5d 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > @@ -359,6 +359,26 @@ > status = "disabled"; > }; > > + usb0: usb3@3100000 { > + compatible = "snps,dwc3"; > + reg = <0x0 0x3100000 0x0 0x10000>; > + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; > + dr_mode = "host"; > + snps,quirk-frame-length-adjustment = <0x20>; > + snps,dis_rxdet_inp3_quirk; > + status = "disabled"; > + }; > + > + usb1: usb3@3110000 { > + compatible = "snps,dwc3"; > + reg = <0x0 0x3110000 0x0 0x10000>; > + interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; > + dr_mode = "host"; > + snps,quirk-frame-length-adjustment = <0x20>; > + snps,dis_rxdet_inp3_quirk; > + status = "disabled"; > + }; > + > sata: sata@3200000 { > compatible = "fsl,ls1088a-ahci"; > reg = <0x0 0x3200000 0x0 0x10000>, > -- > 2.14.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
