Re: [PATCH 2/3] drivers: phy: broadcom: Add driver for Cygnus USB phy controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Oct 24, 2017 at 11:16 AM, Rafał Miłecki <rafal@xxxxxxxxxx> wrote:
> On 2017-10-24 06:37, Raveendra Padasalagi wrote:
>>
>> Add driver for Broadcom's USB phy controller's used in Cygnus
>> familyof SoC. Cygnus has three USB phy controller's, port 0,
>> port 1 provides USB host functionality and port 2 can be configured
>> for host/device role.
>>
>> Configuration of host/device role for port 2 is achieved based on
>> the extcon events, the driver registers to extcon framework to get
>> appropriate connect events for Host/Device cables connect/disconnect
>> states based on VBUS and ID interrupts.
>
>
> Minor issues commented inline.
>
>
>> +#define USB2_IDM_IDM_IO_CONTROL_DIRECT_OFFSET          0x0408
>> +#define USB2_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE      BIT(0)
>
>
> Here you define reg bits using BIT(n).
>
>
>> +#define SUSPEND_OVERRIDE_0                             13
>> +#define SUSPEND_OVERRIDE_1                             14
>> +#define SUSPEND_OVERRIDE_2                             15
>> +#define USB2_IDM_IDM_RESET_CONTROL_OFFSET              0x0800
>> +#define USB2_IDM_IDM_RESET_CONTROL__RESET              0
>
>
> And here without BIT(n). Either is fine but it may be better to be
> consistent about it.

Thanks, will fix it in the next version of the patch.

>
>
>> +static int cygnus_phy_probe(struct platform_device *pdev)
>> +{
>> +       struct resource *res;
>> +       struct cygnus_phy_driver *phy_driver;
>> +       struct phy_provider *phy_provider;
>> +       int i, ret;
>> +       u32 reg_val;
>> +       struct device *dev = &pdev->dev;
>> +       struct device_node *node = dev->of_node;
>> +
>> +       /* allocate memory for each phy instance */
>> +       phy_driver = devm_kzalloc(dev, sizeof(struct cygnus_phy_driver),
>> +                                 GFP_KERNEL);
>> +       if (!phy_driver)
>> +               return -ENOMEM;
>> +
>> +       phy_driver->num_phys = of_get_child_count(node);
>> +
>> +       if (phy_driver->num_phys == 0) {
>> +               dev_err(dev, "PHY no child node\n");
>> +               return -ENODEV;
>> +       }
>> +
>> +       phy_driver->instances = devm_kcalloc(dev, phy_driver->num_phys,
>> +                                            sizeof(struct
>> cygnus_phy_instance),
>> +                                            GFP_KERNEL);
>
>
> I don't think kcalloc is safe here. E.g. In cygnus_phy_shutdown you
> iterate over all instances reading the .power value. If
> cygnus_phy_shutdown gets called before having each instance powered up,
> you'll read random memory as .power value.

Yes, Need to use devm_kzalloc() to make sure contents of
phy_driver->instances is zero initialized.
Will fix it in the next patch.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux