On Tue, Oct 10, 2017 at 7:25 AM, Icenowy Zheng <icenowy@xxxxxxx> wrote:
>
>
> 于 2017年10月10日 GMT+08:00 上午5:04:07, Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> 写到:
>>On Sun, Oct 08, 2017 at 04:29:03AM +0000, Icenowy Zheng wrote:
>>> On newer revisions of the Banana Pi M2 Ultra boards, the 5V power
>>output
>>> (used by HDMI, SATA and USB) is controller via a GPIO.
>>>
>>> Add the regulator node for it.
>>>
>>> Older revisions just have the 5V power output always on, and the GPIO
>>is
>>> reserved on these boards. So it won't affect the older revisions.
>>>
>>> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
>>> ---
>>> arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 9 +++++++++
>>> 1 file changed, 9 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>>b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>>> index 7b52608cebe6..035599d870b9 100644
>>> --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>>> +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>>> @@ -78,6 +78,15 @@
>>> };
>>> };
>>>
>>> + reg_vcc5v0: vcc5v0 {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "vcc5v0";
>>> + regulator-min-microvolt = <5000000>;
>>> + regulator-max-microvolt = <5000000>;
>>> + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
>>> + enable-active-high;
>>
>>This is redundant with the GPIO flag
>
> I remember someone suggested me to add this
> property (maybe wens). It's said that the driver may not
> process the GPIO_ACTIVE_HIGH correctly.
I believe it was me. The fixed regulator driver has not migrated to
the GPIO descriptor API, and it doesn't look like it cares about the
GPIO flags.
ChenYu
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
