于 2017年10月10日 GMT+08:00 上午5:04:07, Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> 写到:
>On Sun, Oct 08, 2017 at 04:29:03AM +0000, Icenowy Zheng wrote:
>> On newer revisions of the Banana Pi M2 Ultra boards, the 5V power
>output
>> (used by HDMI, SATA and USB) is controller via a GPIO.
>>
>> Add the regulator node for it.
>>
>> Older revisions just have the 5V power output always on, and the GPIO
>is
>> reserved on these boards. So it won't affect the older revisions.
>>
>> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
>> ---
>> arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 9 +++++++++
>> 1 file changed, 9 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>> index 7b52608cebe6..035599d870b9 100644
>> --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>> +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>> @@ -78,6 +78,15 @@
>> };
>> };
>>
>> + reg_vcc5v0: vcc5v0 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc5v0";
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
>> + enable-active-high;
>
>This is redundant with the GPIO flag
I remember someone suggested me to add this
property (maybe wens). It's said that the driver may not
process the GPIO_ACTIVE_HIGH correctly.
>
>Maxime
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
