These are the bindings for the gpio-altera-fpgamgr driver.
Signed-off-by: Bernd Edlinger <bernd.edlinger@xxxxxxxxxx>
---
.../bindings/gpio/gpio-altera-fpgamgr.txt | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-altera-fpgamgr.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera-fpgamgr.txt b/Documentation/devicetree/bindings/gpio/gpio-altera-fpgamgr.txt
new file mode 100644
index 0000000..7e9434f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-altera-fpgamgr.txt
@@ -0,0 +1,45 @@
+Altera FPGA Manager GPIO controller bindings
+
+Required controller properties:
+- #address-cells : Should be 1
+- #size-cells : Should be 0
+- compatible:
+ - "altr,fpgamgr-gpio"
+- reg: Physical base address and length of the controller's registers.
+- status : "okay" or "disabled".
+
+The FPGA Manager has two 32-bit ports, one for input and one for output.
+
+Port properties:
+- compatible:
+ - "altr,fpgamgr-gpio-output"
+ - "altr,fpgamgr-gpio-input"
+- #gpio-cells : Should be 2
+ - The first cell is the gpio offset number.
+ - The second cell is reserved and is currently unused.
+- gpio-controller : Marks the device node as a GPIO controller.
+- reg : Port number, 0 for output, 1 for input.
+
+Example:
+
+gpio3: gpio@ff706010 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "altr,fpgamgr-gpio";
+ reg = <0xff706010 0x8>;
+ status = "okay";
+
+ portd: gpio-controller@0 {
+ compatible = "altr,fpgamgr-gpio-output";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ };
+
+ porte: gpio-controller@1 {
+ compatible = "altr,fpgamgr-gpio-input";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <1>;
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
