Hi Jacopo, On Thu, Oct 5, 2017 at 10:58 AM, Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> wrote: > Add pin configuration subnode for ETHER pin group and enable the interface. > > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> > --- a/arch/arm/boot/dts/r7s72100-gr-peach.dts > +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts > @@ -88,3 +110,19 @@ > > status = "okay"; > }; > + > +ðer { > + pinctrl-names = "default"; > + pinctrl-0 = <ðer_pins>; > + > + status = "okay"; > + > + reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>; > + reset-delay-us = <5>; I'm afraid the PHY people (not CCed ;-) will want you to move these reset properties to the phy subnode these days, despite Documentation/devicetree/bindings/net/mdio.txt... > + > + renesas,no-ether-link; > + phy-handle = <&phy0>; > + phy0: ethernet-phy@0 { > + reg = <0>; > + }; > +}; Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html