Add pin configuration subnode for ETHER pin group and enable the interface. Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> --- arch/arm/boot/dts/r7s72100-gr-peach.dts | 38 +++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts index ad6a627..8b5a2c5 100644 --- a/arch/arm/boot/dts/r7s72100-gr-peach.dts +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts @@ -68,6 +68,28 @@ /* P6_2 as RxD2; P6_3 as TxD2 */ pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>; }; + + ether_pins: ether { + /* Ethernet on Ports 1,3,5,10 */ + pinmux = <RZA1_PINMUX(1, 14, 4)>, /* P1_14 = ET_COL */ + <RZA1_PINMUX(3, 0, 2)>, /* P3_0 = ET_TXCLK */ + <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */ + <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */ + <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER */ + <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV */ + <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC */ + <RZA1_PINMUX(10, 1, 4)>, /* P10_1 = ET_TXER */ + <RZA1_PINMUX(10, 2, 4)>, /* P10_2 = ET_TXEN */ + <RZA1_PINMUX(10, 3, 4)>, /* P10_3 = ET_CRS */ + <RZA1_PINMUX(10, 4, 4)>, /* P10_4 = ET_TXD0 */ + <RZA1_PINMUX(10, 5, 4)>, /* P10_5 = ET_TXD1 */ + <RZA1_PINMUX(10, 6, 4)>, /* P10_6 = ET_TXD2 */ + <RZA1_PINMUX(10, 7, 4)>, /* P10_7 = ET_TXD3 */ + <RZA1_PINMUX(10, 8, 4)>, /* P10_8 = ET_RXD0 */ + <RZA1_PINMUX(10, 9, 4)>, /* P10_9 = ET_RXD1 */ + <RZA1_PINMUX(10, 10, 4)>,/* P10_10 = ET_RXD2 */ + <RZA1_PINMUX(10, 11, 4)>;/* P10_11 = ET_RXD3 */ + }; }; &extal_clk { @@ -88,3 +110,19 @@ status = "okay"; }; + +ðer { + pinctrl-names = "default"; + pinctrl-0 = <ðer_pins>; + + status = "okay"; + + reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>; + reset-delay-us = <5>; + + renesas,no-ether-link; + phy-handle = <&phy0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html