Re: [PATCH v3 0/5] Add support to LIS2DW12 accel sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Sun, 1 Oct 2017 15:15:26 +0200
Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx> wrote:

> > On Wed, 30 Aug 2017 13:50:38 +0200
> > Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx> wrote:
> >  
> >> Modify management of drdy line and status register in order to support
> >> LIS2DW12 device
> >>
> >> Changes since v2:
> >> - swap status register patch (3rd in v2) with irq{1,2} definition one
> >>   (1st in v2)
> >> - patchset rebased onto 'fix drdy line configuration for LIS3MDL' patch
> >> Changes since v1:
> >> - remove drdy_irq parameter from LPS001WP settings since the sensor
> >> does not support data-ready interrupts
> >>
> >> Lorenzo Bianconi (5):
> >>   iio: st_sensors: add register mask for status register
> >>   iio: st_sensors: decouple irq1 configuration parameters from the irq2
> >>     ones
> >>   iio: st_sensors: do not always write enable_axis register
> >>   iio: accel: add support to LIS2DW12
> >>   dt-bindings: iio: accel: add LIS2DW12 sensor device binding
> >>
> >>  .../devicetree/bindings/iio/st-sensors.txt         |   1 +
> >>  drivers/iio/accel/st_accel.h                       |   2 +
> >>  drivers/iio/accel/st_accel_core.c                  | 180 +++++++++++++++++----
> >>  drivers/iio/accel/st_accel_i2c.c                   |   5 +
> >>  drivers/iio/accel/st_accel_spi.c                   |   5 +
> >>  drivers/iio/common/st_sensors/st_sensors_core.c    |  35 ++--
> >>  drivers/iio/common/st_sensors/st_sensors_trigger.c |  16 +-
> >>  drivers/iio/gyro/st_gyro_core.c                    |  33 ++--
> >>  drivers/iio/magnetometer/st_magn_core.c            |  16 +-
> >>  drivers/iio/pressure/st_pressure_core.c            |  46 ++++--
> >>  include/linux/iio/common/st_sensors.h              |  23 ++-
> >>  11 files changed, 270 insertions(+), 92 deletions(-)
> >>  
> >
> > I'm happy with the whole series, however it doesn't currently apply
> > due to various fixes working their way through the fixes branches
> > of the iio git tree.  I'll try to pick it up once those have unwound.
> > There is too much going on with this code at the moment to do this
> > cleanly now.
> >
> > Give me a bump if I look like I have forgotten it once it will
> > apply cleanly to the togreg branch of iio.git.
> >
> > If I was being really fussy  this should have had a dependency list
> > for everything it was dependant on that wasn't currently in mainline.
> >
> > Jonathan  
> 
> Hi Jonathan,
> 
> what about that patchset?
> Regards,
> 
> Lorenzo
> 

I think I'm still waiting for the fixes to get back round via mainline
to our upstream tree...   Will check again later this week.

Jonathan
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux