Broadcom Hurricane 2 SoCs typically use their secondary UART for debug/console, provide a known good location for that. Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> --- arch/arm/Kconfig.debug | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 6dcea8e8e941..0346805fe33c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -169,6 +169,11 @@ choice depends on ARCH_BCM_5301X || ARCH_BCM_NSP select DEBUG_UART_8250 + config DEBUG_BCM_HR2 + bool "Kernel low-level debugging on Hurricane 2 UART2" + depends on ARCH_BCM_HR2 + select DEBUG_UART_8250 + config DEBUG_BCM_KONA_UART bool "Kernel low-level debugging messages via BCM KONA UART" depends on ARCH_BCM_MOBILE @@ -1508,6 +1513,7 @@ config DEBUG_UART_PHYS default 0x11009000 if DEBUG_MT8135_UART3 default 0x16000000 if DEBUG_INTEGRATOR default 0x18000300 if DEBUG_BCM_5301X + default 0x18000400 if DEBUG_BCM_HR2 default 0x18010000 if DEBUG_SIRFATLAS7_UART0 default 0x18020000 if DEBUG_SIRFATLAS7_UART1 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 @@ -1623,6 +1629,7 @@ config DEBUG_UART_VIRT default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 default 0xf1000300 if DEBUG_BCM_5301X + default 0xf1000400 if DEBUG_BCM_HR2 default 0xf1002000 if DEBUG_MT8127_UART0 default 0xf1006000 if DEBUG_MT6589_UART0 default 0xf1009000 if DEBUG_MT8135_UART3 @@ -1728,7 +1735,8 @@ config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \ - DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3 + DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \ + DEBUG_OMAP7XXUART3 default 2 config DEBUG_UART_8250_WORD -- 2.14.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
