Hi all, This patch series adds basic (boot to prompt with essential peripherals working) support for Broadcom's Hurricane 2 SoC which is found in switching applications. This is also an iProc-family chip with a number of variations, including some in the clock controller that I have not been able to identify yet. Florian Fainelli (10): MAINTAINERS: Update Broadcom iProc regexp with Hurricane 2 dt-bindings: Add documentation for Broadcom Hurricane 2 SoCs ARM: bcm: Add support for Broadcom Hurricane 2 SoC dt-bindings: Document Broadcom Hurricane 2 clocks clk: bcm: Add Broadcom Hurricane 2 clock support ARM: dts: Add Broadcom Hurricane 2 DTS include file ARM: debug: Add Hurricane 2 UART2 debug addresses dt-bindings: Add Ubiquiti Networks vendor prefix ARM: dts: Hurricane 2: Add basic support for Ubiquiti UniFi Switch 8 ARM: multi_v7_defconfig: Enable CONFIG_ARCH_BCM_HR2 .../devicetree/bindings/arm/bcm/brcm,hr2.txt | 14 + .../bindings/clock/brcm,iproc-clocks.txt | 14 + .../devicetree/bindings/vendor-prefixes.txt | 1 + MAINTAINERS | 1 + arch/arm/Kconfig.debug | 10 +- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/bcm-hr2.dtsi | 368 +++++++++++++++++++++ arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts | 85 +++++ arch/arm/configs/multi_v7_defconfig | 1 + arch/arm/mach-bcm/Kconfig | 9 + arch/arm/mach-bcm/Makefile | 3 + arch/arm/mach-bcm/bcm_hr2.c | 25 ++ drivers/clk/bcm/Kconfig | 9 + drivers/clk/bcm/Makefile | 1 + drivers/clk/bcm/clk-hr2.c | 27 ++ 15 files changed, 569 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt create mode 100644 arch/arm/boot/dts/bcm-hr2.dtsi create mode 100644 arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts create mode 100644 arch/arm/mach-bcm/bcm_hr2.c create mode 100644 drivers/clk/bcm/clk-hr2.c -- 2.14.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
