Hi Moritz sorry for delay. On 12.9.2017 01:22, Moritz Fischer wrote: > Add support for the National Instruments Project Sulfur SDR > motherboards Rev 2,3 and 4. > > Signed-off-by: Moritz Fischer <mdf@xxxxxxxxxx> > --- > arch/arm/boot/dts/Makefile | 3 + > arch/arm/boot/dts/zynq-ni-sulfur-rev2.dts | 84 +++++++++++++++++++ > arch/arm/boot/dts/zynq-ni-sulfur-rev3.dts | 118 ++++++++++++++++++++++++++ > arch/arm/boot/dts/zynq-ni-sulfur-rev4.dts | 26 ++++++ > arch/arm/boot/dts/zynq-ni-sulfur.dtsi | 133 ++++++++++++++++++++++++++++++ > 5 files changed, 364 insertions(+) > create mode 100644 arch/arm/boot/dts/zynq-ni-sulfur-rev2.dts > create mode 100644 arch/arm/boot/dts/zynq-ni-sulfur-rev3.dts > create mode 100644 arch/arm/boot/dts/zynq-ni-sulfur-rev4.dts > create mode 100644 arch/arm/boot/dts/zynq-ni-sulfur.dtsi Is this publicly available board? I am not quite sure we should apply these dts files. There are a lot of boards with zynq and there must be any strong argument for applying this to the tree. For arm32 with even flat tree structure. Arnd: Do you have any policy about it? Thanks, Michal -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
