Hi, Here is an attempt at supporting the MIPI-CSI2 TX block from Cadence. This IP block is able to receive 4 video streams and stream them over a MIPI-CSI2 link using up to 4 lanes. Those streams are basically the interfaces to controllers generating some video signals, like a camera or a pattern generator. It is able to map input streams to CSI2 virtual channels and datatypes dynamically. The streaming devices choose their virtual channels through an additional signal that is transparent to the CSI2-TX. The datatypes however are yet another additional input signal, and can be mapped to any CSI2 datatypes. Since v4l2 doesn't really allow for that setup at the moment, this preliminary version is a rather dumb one in order to start the discussion on how to address this properly. This serie depends on the version 14 of the serie "Unified fwnode endpoint parser, async sub-device notifier support, N9 flash DTS" by Sakari Ailus Let me know what you think! Maxime Maxime Ripard (2): dt-bindings: media: Add Cadence MIPI-CSI2 TX Device Tree bindings v4l: cadence: Add Cadence MIPI-CSI2 TX driver .../devicetree/bindings/media/cdns,csi2tx.txt | 97 +++++ drivers/media/platform/cadence/Kconfig | 6 + drivers/media/platform/cadence/Makefile | 1 + drivers/media/platform/cadence/cdns-csi2tx.c | 479 +++++++++++++++++++++ 4 files changed, 583 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/cdns,csi2tx.txt create mode 100644 drivers/media/platform/cadence/cdns-csi2tx.c -- 2.13.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
