Hello Yong,
I noticed one issue in the register macros. See below.
Yong Deng píše v Čt 27. 07. 2017 v 13:01 +0800:
> Allwinner V3s SoC have two CSI module. CSI0 is used for MIPI interface
> and CSI1 is used for parallel interface. This is not documented in
> datasheet but by testing and guess.
>
> This patch implement a v4l2 framework driver for it.
>
> Currently, the driver only support the parallel interface. MIPI-CSI2,
> ISP's support are not included in this patch.
>
> Signed-off-by: Yong Deng <yong.deng@xxxxxxxxxxxx>
> ---
>
[snip]
> +
> +#define CSI_CH_INT_EN_REG 0x70
> +#define CSI_CH_INT_EN_VS_INT_EN BIT(7)
> +#define CSI_CH_INT_EN_HB_OF_INT_EN BIT(6)
> +#define CSI_CH_INT_EN_MUL_ERR_INT_EN BIT(5)
> +#define CSI_CH_INT_EN_FIFO2_OF_INT_EN BIT(4)
> +#define CSI_CH_INT_EN_FIFO1_OF_INT_EN BIT(3)
> +#define CSI_CH_INT_EN_FIFO0_OF_INT_EN BIT(2)
> +#define CSI_CH_INT_EN_FD_INT_EN BIT(1)
> +#define CSI_CH_INT_EN_CD_INT_EN BIT(0)
> +
> +#define CSI_CH_INT_STA_REG 0x74
> +#define CSI_CH_INT_STA_VS_PD BIT(7)
> +#define CSI_CH_INT_STA_HB_OF_PD BIT(6)
> +#define CSI_CH_INT_STA_MUL_ERR_PD BIT(5)
> +#define CSI_CH_INT_STA_FIFO2_OF_PD BIT(4)
> +#define CSI_CH_INT_STA_FIFO1_OF_PD BIT(3)
> +#define CSI_CH_INT_STA_FIFO0_OF_PD BIT(2)
> +#define CSI_CH_INT_STA_FD_PD BIT(1)
> +#define CSI_CH_INT_STA_CD_PD BIT(0)
> +
> +#define CSI_CH_FLD1_VSIZE_REG 0x74
This register should be 0x78 according to the V3s manual. Though it's
not used in your driver yet, so it is not yet causing any issues.
> +#define CSI_CH_HSIZE_REG 0x80
> +#define CSI_CH_HSIZE_HOR_LEN_MASK GENMASK(28, 16)
> +#define CSI_CH_HSIZE_HOR_LEN(len) ((len << 16) & CSI_CH_HSIZE_HOR_LEN_MASK)
> +#define CSI_CH_HSIZE_HOR_START_MASK GENMASK(12, 0)
> +#define CSI_CH_HSIZE_HOR_START(start) ((start << 0) & CSI_CH_HSIZE_HOR_START_MASK)
> +
> +#define CSI_CH_VSIZE_REG 0x84
> +#define CSI_CH_VSIZE_VER_LEN_MASK GENMASK(28, 16)
> +#define CSI_CH_VSIZE_VER_LEN(len) ((len << 16) & CSI_CH_VSIZE_VER_LEN_MASK)
> +#define CSI_CH_VSIZE_VER_START_MASK GENMASK(12, 0)
> +#define CSI_CH_VSIZE_VER_START(start) ((start << 0) & CSI_CH_VSIZE_VER_START_MASK)
> +
> +#define CSI_CH_BUF_LEN_REG 0x88
> +#define CSI_CH_BUF_LEN_BUF_LEN_C_MASK GENMASK(29, 16)
> +#define CSI_CH_BUF_LEN_BUF_LEN_C(len) ((len << 16) & CSI_CH_BUF_LEN_BUF_LEN_C_MASK)
> +#define CSI_CH_BUF_LEN_BUF_LEN_Y_MASK GENMASK(13, 0)
> +#define CSI_CH_BUF_LEN_BUF_LEN_Y(len) ((len << 0) & CSI_CH_BUF_LEN_BUF_LEN_Y_MASK)
> +
> +#define CSI_CH_FLIP_SIZE_REG 0x8c
> +#define CSI_CH_FLIP_SIZE_VER_LEN_MASK GENMASK(28, 16)
> +#define CSI_CH_FLIP_SIZE_VER_LEN(len) ((len << 16) & CSI_CH_FLIP_SIZE_VER_LEN_MASK)
> +#define CSI_CH_FLIP_SIZE_VALID_LEN_MASK GENMASK(12, 0)
> +#define CSI_CH_FLIP_SIZE_VALID_LEN(len) ((len << 0) & CSI_CH_FLIP_SIZE_VALID_LEN_MASK)
> +
> +#define CSI_CH_FRM_CLK_CNT_REG 0x90
> +#define CSI_CH_ACC_ITNL_CLK_CNT_REG 0x94
> +#define CSI_CH_FIFO_STAT_REG 0x98
> +#define CSI_CH_PCLK_STAT_REG 0x9c
> +
> +/*
> + * csi input data format
> + */
> +enum csi_input_fmt
> +{
> + CSI_INPUT_FORMAT_RAW = 0,
> + CSI_INPUT_FORMAT_YUV422 = 3,
> + CSI_INPUT_FORMAT_YUV420 = 4,
> +};
> +
> +/*
> + * csi output data format
> + */
> +enum csi_output_fmt
> +{
> + /* only when input format is RAW */
> + CSI_FIELD_RAW_8 = 0,
> + CSI_FIELD_RAW_10 = 1,
> + CSI_FIELD_RAW_12 = 2,
> + CSI_FIELD_RGB565 = 4,
> + CSI_FIELD_RGB888 = 5,
> + CSI_FIELD_PRGB888 = 6,
> + CSI_FRAME_RAW_8 = 8,
> + CSI_FRAME_RAW_10 = 9,
> + CSI_FRAME_RAW_12 = 10,
> + CSI_FRAME_RGB565 = 12,
> + CSI_FRAME_RGB888 = 13,
> + CSI_FRAME_PRGB888 = 14,
> +
> + /* only when input format is YUV422/YUV420 */
Other limitation is that when input is YUV420 output can only be YUV420
and not YUV422.
> + CSI_FIELD_PLANAR_YUV422 = 0,
> + CSI_FIELD_PLANAR_YUV420 = 1,
> + CSI_FRAME_PLANAR_YUV420 = 2,
> + CSI_FRAME_PLANAR_YUV422 = 3,
> + CSI_FIELD_UV_CB_YUV422 = 4,
> + CSI_FIELD_UV_CB_YUV420 = 5,
> + CSI_FRAME_UV_CB_YUV420 = 6,
> + CSI_FRAME_UV_CB_YUV422 = 7,
> + CSI_FIELD_MB_YUV422 = 8,
> + CSI_FIELD_MB_YUV420 = 9,
> + CSI_FRAME_MB_YUV420 = 10,
> + CSI_FRAME_MB_YUV422 = 11,
> + CSI_FIELD_UV_CB_YUV422_10 = 12,
> + CSI_FIELD_UV_CB_YUV420_10 = 13,
> +};
> +
thank you and regards,
OndrejAttachment:
signature.asc
Description: This is a digitally signed message part
