From: Carlo Caione <carlo@xxxxxxxxxx> Booting the secondary CPU cores involves the following nodes/devices: - SCU (Snoop-Control-Unit, for which we already have a DT node) - a reset line for each CPU core, provided by the reset-controller which is built into the clock-controller - the PMU (power management unit) which controls the power of the CPU cores - a range in the SRAM specifically reserved for booting secondary CPU cores - the "enable-method" which activates booting the secondary CPU cores This adds all required nodes and properties to boot the secondary CPU cores. Signed-off-by: Carlo Caione <carlo@xxxxxxxxxx> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/meson8b.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index bc278da7df0d..aaebfcce9073 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/clock/meson8b-clkc.h> #include <dt-bindings/gpio/meson8b-gpio.h> #include <dt-bindings/reset/amlogic,meson8b-reset.h> +#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h> #include "meson.dtsi" / { @@ -59,6 +60,8 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x200>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; }; cpu@201 { @@ -66,6 +69,8 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x201>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; }; cpu@202 { @@ -73,6 +78,8 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x202>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; }; cpu@203 { @@ -80,6 +87,8 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x203>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; }; }; @@ -90,6 +99,11 @@ }; /* end of / */ &aobus { + pmu: pmu@e0 { + compatible = "amlogic,meson8b-pmu", "syscon"; + reg = <0xe0 0x18>; + }; + pinctrl_aobus: pinctrl@84 { compatible = "amlogic,meson8b-aobus-pinctrl"; reg = <0x84 0xc>; @@ -157,6 +171,13 @@ }; }; +&ahb_sram { + smp-sram@1ff80 { + compatible = "amlogic,meson8b-smp-sram"; + reg = <0x1ff80 0x8>; + }; +}; + ðmac { clocks = <&clkc CLKID_ETH>; clock-names = "stmmaceth"; -- 2.14.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html