This set of patches adds board support for an omap3 system from INCOstartec. It's based on next-20140122. Previously it was based on next-20140115. There, everything works as expected. On branch git://git.linaro.org/people/ulf.hansson/clk.git linaro_clk/clk-next which holdes all "clock DT conversion" commits, bootlog shows these abnormalities: [ 0.559600] ------------[ cut here ]------------ [ 0.559631] WARNING: CPU: 0 PID: 1 at /home/honschu/media/linux/drivers/video/omap2/dss/dss.c:540 dss_set_clock_div+0xac/0xcc() [ 0.559661] clk rate mismatch: 345600000 != 172800000 [ 0.559661] Modules linked in: [ 0.559692] CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-rc7+ 0 [ 0.559722] [<c0012fc4>] (unwind_backtrace+0x0/0xf8) from [<c0010e10>] (show_stack+0x10/0x14) [ 0.559753] [<c0010e10>] (show_stack+0x10/0x14) from [<c0033fdc>] (warn_slowpath_common+0x64/0x84) [ 0.559783] [<c0033fdc>] (warn_slowpath_common+0x64/0x84) from [<c0034090>] (warn_slowpath_fmt+0x30/0x40) [ 0.559814] [<c0034090>] (warn_slowpath_fmt+0x30/0x40) from [<c02b23c0>] (dss_set_clock_div+0xac/0xcc) [ 0.559844] [<c02b23c0>] (dss_set_clock_div+0xac/0xcc) from [<c0778f48>] (omap_dsshw_probe+0x1ec/0x2e0) [ 0.559875] [<c0778f48>] (omap_dsshw_probe+0x1ec/0x2e0) from [<c02ff360>] (platform_drv_probe+0x18/0x48) [ 0.559906] [<c02ff360>] (platform_drv_probe+0x18/0x48) from [<c02fdf84>] (driver_probe_device+0x110/0x230) [ 0.559936] [<c02fdf84>] (driver_probe_device+0x110/0x230) from [<c02fe138>] (__driver_attach+0x94/0x98) [ 0.559967] [<c02fe138>] (__driver_attach+0x94/0x98) from [<c02fc724>] (bus_for_each_dev+0x54/0x88) [ 0.559997] [<c02fc724>] (bus_for_each_dev+0x54/0x88) from [<c02fd720>] (bus_add_driver+0xd4/0x1d0) [ 0.559997] [<c02fd720>] (bus_add_driver+0xd4/0x1d0) from [<c02fe76c>] (driver_register+0x78/0xf4) [ 0.560028] [<c02fe76c>] (driver_register+0x78/0xf4) from [<c02ff2c4>] (platform_driver_probe+0x20/0xa4) [ 0.560058] [<c02ff2c4>] (platform_driver_probe+0x20/0xa4) from [<c0778ce0>] (omap_dss_init+0x1c/0x98) [ 0.560089] [<c0778ce0>] (omap_dss_init+0x1c/0x98) from [<c0008828>] (do_one_initcall+0xe4/0x144) [ 0.560119] [<c0008828>] (do_one_initcall+0xe4/0x144) from [<c075eadc>] (kernel_init_freeable+0xe8/0x1b0) [ 0.560150] [<c075eadc>] (kernel_init_freeable+0xe8/0x1b0) from [<c05522bc>] (kernel_init+0x8/0x118) [ 0.560180] [<c05522bc>] (kernel_init+0x8/0x118) from [<c000e4c8>] (ret_from_fork+0x14/0x2c) [ 0.560302] ---[ end trace 187e8d9dd0655394 ]--- [ 0.560424] OMAP DSS rev 2.0 --snip-- [ 2.601745] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.767059] usb 1-1: device descriptor read/64, error -71 [ 3.007934] usb 1-1: device descriptor read/64, error -71 [ 3.237091] usb 1-1: new high-speed USB device number 3 using ehci-omap [ 3.387054] usb 1-1: device descriptor read/64, error -71 [ 3.637054] usb 1-1: device descriptor read/64, error -71 [ 3.867065] usb 1-1: new high-speed USB device number 4 using ehci-omap [ 4.296966] usb 1-1: device not accepting address 4, error -71 [ 4.417053] usb 1-1: new high-speed USB device number 5 using ehci-omap [ 4.846954] usb 1-1: device not accepting address 5, error -71 [ 4.853179] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 5.217041] usb 2-1: new full-speed USB device number 2 using ohci-omap3 [ 5.407043] usb 2-1: device descriptor read/64, error -62 [ 5.697052] usb 2-1: device descriptor read/64, error -62 [ 5.987060] usb 2-1: new full-speed USB device number 3 using ohci-omap3 [ 6.066955] .[ 6.177062] usb 2-1: device descriptor read/64, error -62 [ 6.467041] usb 2-1: device descriptor read/64, error -62 [ 6.757049] usb 2-1: new full-speed USB device number 4 using ohci-omap3 [ 7.176971] usb 2-1: device not accepting address 4, error -62 [ 7.357055] usb 2-1: new full-speed USB device number 5 using ohci-omap3 [ 7.776977] usb 2-1: device not accepting address 5, error -62 [ 7.783233] hub 2-0:1.0: unable to enumerate USB device on port 1 On next-20140122 the tps65930 (which should be compatible to twl4030) doesn't set voltage on IO.1P8 any more which leads to a lot of external subsystem failings like dss: [ 0.602264] omapdss_dss: probe of omapdss_dss failed with error -22 [ 0.602691] omapdss CORE error: Failed to initialize DSS platform driver [ 0.603240] panel-dpi panel-dpi.0: failed to find video source 'dpi.0' Changes compared to previous version: - rebased on next-20140122 from next-20140115 - using omap36xx.dtsi instead of unsupported 1ghz omap37xx100 Christoph Fritz (5): ARM: dts: omap3: Add support for INCOstartec a83x module ARM: dts: omap3: Add support for INCOstartec DBB056 baseboard ARM: OMAP2+: add legacy display for omap3 DBB056 ARM: OMAP2+: Add pdata quirk for sys_clkout2 for omap3 DBB056 [RFC] omapdss: remove FEAT_DPI_USES_VDDS_DSI from omap3 arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 445 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap3-lilly-dbb056.dts | 160 +++++++++++ arch/arm/mach-omap2/dss-common.c | 49 ++++ arch/arm/mach-omap2/dss-common.h | 1 + arch/arm/mach-omap2/pdata-quirks.c | 44 ++- drivers/video/omap2/dss/dss_features.c | 1 - 7 files changed, 699 insertions(+), 2 deletions(-) create mode 100644 arch/arm/boot/dts/omap3-lilly-a83x.dtsi create mode 100644 arch/arm/boot/dts/omap3-lilly-dbb056.dts -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
