On 7 September 2017 at 10:48, Baolin Wang <baolin.wang@xxxxxxxxxx> wrote:
> Hi Vinod,
>
> On 7 September 2017 at 00:22, Vinod Koul <vinod.koul@xxxxxxxxx> wrote:
>> On Tue, Sep 05, 2017 at 07:48:43PM +0800, Baolin Wang wrote:
>>
>>> > > +/* DMA global registers definition */
>>> > > +#define DMA_GLB_PAUSE 0x0
>>> > > +#define DMA_GLB_FRAG_WAIT 0x4
>>> > > +#define DMA_GLB_REQ_PEND0_EN 0x8
>>> > > +#define DMA_GLB_REQ_PEND1_EN 0xc
>>> > > +#define DMA_GLB_INT_RAW_STS 0x10
>>> > > +#define DMA_GLB_INT_MSK_STS 0x14
>>> > > +#define DMA_GLB_REQ_STS 0x18
>>> > > +#define DMA_GLB_CHN_EN_STS 0x1c
>>> > > +#define DMA_GLB_DEBUG_STS 0x20
>>> > > +#define DMA_GLB_ARB_SEL_STS 0x24
>>> > > +#define DMA_GLB_CHN_START_CHN_CFG1 0x28
>>> > > +#define DMA_GLB_CHN_START_CHN_CFG2 0x2c
>>> > > +#define DMA_CHN_LLIST_OFFSET 0x10
>>> > > +#define DMA_GLB_REQ_CID_OFFSET 0x2000
>>> > > +#define DMA_GLB_REQ_CID(uid) (0x4 * ((uid) - 1))
>>> >
>>> > namespaced properly please, here and rest..
>>>
>>> Could you elaborate which name need to named properly?
>>> I guess DMA_GLB_REQ_CID is not very clear, can I change
>>> to DMA_GLB_REQ_UID(uid) which is used to define the UID
>>> registers?
>>
>> I meant something like:
>>
>> SPRD_DMA_xxxx
>>
>> DMA_GLB is very generic term and might cause collisions in future so lets
>> make these future proof..
>
> Make sense.
>
>>
>>> > > +static int sprd_dma_enable(struct sprd_dma_dev *sdev)
>>> > > +{
>>> > > + int ret;
>>> > > +
>>> > > + ret = clk_prepare_enable(sdev->clk);
>>> > > + if (ret)
>>> > > + return ret;
>>> > > +
>>> > > + if (!IS_ERR(sdev->ashb_clk))
>>> >
>>> > that looks odd, can you explain this?
>>>
>>> Since the ashb_clk is optional and only for AGCP DMA controller,
>>> so here we add one condition to check if the ashb_clk need enable.
>>
>> it be worth documenting this..
>
> OK.
>
>>
>>> > > +static void sprd_dma_free_chan_resources(struct dma_chan *chan)
>>> > > +{
>>> > > + struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
>>> > > + unsigned long flags;
>>> > > +
>>> > > + spin_lock_irqsave(&schan->vc.lock, flags);
>>> > > + sprd_dma_stop(schan);
>>> > > + spin_unlock_irqrestore(&schan->vc.lock, flags);
>>> > > +
>>> > > + vchan_free_chan_resources(&schan->vc);
>>> > > + pm_runtime_put_sync(chan->device->dev);
>>> >
>>> > why put_sync()
>>>
>>> Since we will get pm counter to resume DMA when allocating resources, then
>>> we should put pm counter in sprd_dma_free_chan_resources() to try to suspend
>>> DMA if the pm counter is 0.
>>
>> runtime_pm part is fine, you could have used pm_runtime_put(), why the
>> sync() variant here...
>
> After checking again, I agree pm_runtime_put() is enough here and I
> will fix it in next version.
>
>>>
>>> >
>>> > > +static enum dma_status sprd_dma_tx_status(struct dma_chan *chan,
>>> > > + dma_cookie_t cookie,
>>> > > + struct dma_tx_state *txstate)
>>> > > +{
>>> > > + struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
>>> > > + unsigned long flags;
>>> > > + enum dma_status ret;
>>> > > +
>>> > > + ret = dma_cookie_status(chan, cookie, txstate);
>>> > > +
>>> > > + spin_lock_irqsave(&schan->vc.lock, flags);
>>> > > + txstate->residue = sprd_dma_get_dst_addr(schan);
>>> >
>>> > I dont think this is correct, the residue needs to be read only for current
>>> > cookie and the query might be for one which is not even submitted
>>>
>>> We have one scenario for our audio driver, the audio driver need to get
>>> the destination address to check if their transfer is done in no irq mode.
>>
>> Yes but for the descriptor requested but not any. Audio maybe working as
>> period count maybe lesser...
Sorry for missing one comment. I know what is your meaning, now I
understand the residue needs to be read only for current cookie and I
will fix this in next version.
>>
>>> > > +static int sprd_dma_probe(struct platform_device *pdev)
>>> > > +{
>>> > > + struct device_node *np = pdev->dev.of_node;
>>> > > + struct sprd_dma_dev *sdev;
>>> > > + struct sprd_dma_chn *dma_chn;
>>> > > + struct resource *res;
>>> > > + u32 chn_count;
>>> > > + int ret, i;
>>> > > +
>>> > > + ret = of_property_read_u32(np, "#dma-channels", &chn_count);
>>> > > + if (ret) {
>>> > > + dev_err(&pdev->dev, "get dma channels count failed\n");
>>> > > + return ret;
>>> > > + }
>>> > > +
>>> > > + sdev = devm_kzalloc(&pdev->dev, (sizeof(*sdev) +
>>> > > + (sizeof(struct sprd_dma_chn) * chn_count)),
>>> > > + GFP_KERNEL);
>>> > > + if (!sdev)
>>> > > + return -ENOMEM;
>>> > > +
>>> > > + sdev->clk = devm_clk_get(&pdev->dev, "enable");
>>> > > + if (IS_ERR(sdev->clk)) {
>>> > > + dev_err(&pdev->dev, "get enable clock failed\n");
>>> > > + return PTR_ERR(sdev->clk);
>>> > > + }
>>> > > +
>>> > > + /* ashb clock is optional for AGCP DMA */
>>> > > + sdev->ashb_clk = devm_clk_get(&pdev->dev, "ashb_eb");
>>> > > + if (IS_ERR(sdev->ashb_clk))
>>> > > + dev_warn(&pdev->dev, "no optional ashb eb clock\n");
>>> > > +
>>> > > + sdev->irq = platform_get_irq(pdev, 0);
>>> > > + if (sdev->irq > 0) {
>>> > > + ret = devm_request_irq(&pdev->dev, sdev->irq, dma_irq_handle,
>>> > > + 0, "sprd_dma", (void *)sdev);
>>> >
>>> > so after this your driver should be able to handle the urq, are you ready
>>> > for that, I think not
>>>
>>> We have one no irq mode for audio driver, our DMA driver do not need do handle
>>> the irq, and audio driver can get the destination address to check if their
>>> transfer is done.
>>
>> ?? you are adding interrupt handler!
>
> Sorry for confusing. This driver is not only for one DMA controller,
> we can have 3 DMA controllers for different usage, moreover we can
> have irq mode or no irq mode for different cases, in irq mode the DMA
> interrupt handler need handle the descriptors when transfer is done.
> But in no irq mode for our audio driver special case, which is used to
> save system power without DMA interrupts resume system, in this
> scenario we do not need complete descriptors by DMA handler.
>
>>
>>> > > +static int sprd_dma_remove(struct platform_device *pdev)
>>> > > +{
>>> > > + struct sprd_dma_dev *sdev = platform_get_drvdata(pdev);
>>> > > + int ret;
>>> > > +
>>> > > + ret = pm_runtime_get_sync(&pdev->dev);
>>> > > + if (ret < 0)
>>> > > + return ret;
>>> > > +
>>> > > + dma_async_device_unregister(&sdev->dma_dev);
>>> > > + sprd_dma_disable(sdev);
>>> >
>>> > and irq is not freed, how do you guarantee that irqs are not scheduled
>>> > anymore and all tasklets running have completed and cant be further
>>> > scheduled?
>>>
>>> Since we request irq by devm_xxx() API, which means the irq can be freed
>>> automatically when removing the DMA driver.
>>
>> no, thats buggy. you should explictly, a) kill the tasklet b) free irq
>
> OK.
>
>>
>>> > > +static int __init sprd_dma_init(void)
>>> > > +{
>>> > > + return platform_driver_register(&sprd_dma_driver);
>>> > > +}
>>> > > +arch_initcall_sync(sprd_dma_init);
>>> > > +
>>> > > +static void __exit sprd_dma_exit(void)
>>> > > +{
>>> > > + platform_driver_unregister(&sprd_dma_driver);
>>> > > +}
>>> > > +module_exit(sprd_dma_exit);
>>> >
>>> > module_platform_driver() pls
>>>
>>> Since our SPI will depend on DMA driver, but I will try to set module_init
>>> level.
>>
>> ah okay, i missed that. Btw with defer probe I don't think we should have
>> that issue
>
> Yes. Will fix that. Thanks for your comments.
>
> --
> Baolin.wang
> Best Regards
--
Baolin.wang
Best Regards
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
