On Tue, Aug 29, 2017 at 04:47:17PM +0800, Baolin Wang wrote:
> +config SPRD_DMA
> + bool "Spreadtrum DMA support"
> + depends on ARCH_SPRD
can you also add compile test to this, it helps in getting good coverage and
easy to compile changes
> +/* DMA global registers definition */
> +#define DMA_GLB_PAUSE 0x0
> +#define DMA_GLB_FRAG_WAIT 0x4
> +#define DMA_GLB_REQ_PEND0_EN 0x8
> +#define DMA_GLB_REQ_PEND1_EN 0xc
> +#define DMA_GLB_INT_RAW_STS 0x10
> +#define DMA_GLB_INT_MSK_STS 0x14
> +#define DMA_GLB_REQ_STS 0x18
> +#define DMA_GLB_CHN_EN_STS 0x1c
> +#define DMA_GLB_DEBUG_STS 0x20
> +#define DMA_GLB_ARB_SEL_STS 0x24
> +#define DMA_GLB_CHN_START_CHN_CFG1 0x28
> +#define DMA_GLB_CHN_START_CHN_CFG2 0x2c
> +#define DMA_CHN_LLIST_OFFSET 0x10
> +#define DMA_GLB_REQ_CID_OFFSET 0x2000
> +#define DMA_GLB_REQ_CID(uid) (0x4 * ((uid) - 1))
namespaced properly please, here and rest..
> +static int sprd_dma_enable(struct sprd_dma_dev *sdev)
> +{
> + int ret;
> +
> + ret = clk_prepare_enable(sdev->clk);
> + if (ret)
> + return ret;
> +
> + if (!IS_ERR(sdev->ashb_clk))
that looks odd, can you explain this?
> +static void sprd_dma_set_uid(struct sprd_dma_chn *schan)
> +{
> + struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
> + u32 dev_id = schan->dev_id;
> +
> + if (dev_id != DMA_SOFTWARE_UID) {
> + unsigned long uid_offset = DMA_GLB_REQ_CID_OFFSET +
> + DMA_GLB_REQ_CID(dev_id);
right justified pls
> +static void sprd_dma_enable_chn(struct sprd_dma_chn *schan)
> +{
> + u32 cfg = readl(schan->chn_base + DMA_CHN_CFG);
> +
> + cfg |= DMA_CHN_EN;
> + writel(cfg, schan->chn_base + DMA_CHN_CFG);
how about add a sprd_updatel() helper which does read modify and update for
you. This way you can save quite a bit of code above...
> +static enum dma_int_type sprd_dma_get_int_type(struct sprd_dma_chn *schan)
> +{
> + u32 intc_sts = readl(schan->chn_base + DMA_CHN_INTC) & DMA_CHN_INT_STS;
> +
> + switch (intc_sts) {
> + case CFGERR_INT_STS:
> + return CONFIG_ERR;
empty line after each return pls
> +static void sprd_dma_free_chan_resources(struct dma_chan *chan)
> +{
> + struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
> + unsigned long flags;
> +
> + spin_lock_irqsave(&schan->vc.lock, flags);
> + sprd_dma_stop(schan);
> + spin_unlock_irqrestore(&schan->vc.lock, flags);
> +
> + vchan_free_chan_resources(&schan->vc);
> + pm_runtime_put_sync(chan->device->dev);
why put_sync()
> +static enum dma_status sprd_dma_tx_status(struct dma_chan *chan,
> + dma_cookie_t cookie,
> + struct dma_tx_state *txstate)
> +{
> + struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
> + unsigned long flags;
> + enum dma_status ret;
> +
> + ret = dma_cookie_status(chan, cookie, txstate);
> +
> + spin_lock_irqsave(&schan->vc.lock, flags);
> + txstate->residue = sprd_dma_get_dst_addr(schan);
I dont think this is correct, the residue needs to be read only for current
cookie and the query might be for one which is not even submitted
> + hw->intc = CFG_ERROR_INT_EN;
> + switch (irq_mode) {
> + case NO_INT:
> + break;
> + case FRAG_DONE:
> + hw->intc |= FRAG_INT_EN;
> + break;
> + case BLK_DONE:
> + hw->intc |= BLK_INT_EN;
> + break;
> + case BLOCK_FRAG_DONE:
> + hw->intc |= BLK_INT_EN | FRAG_INT_EN;
> + break;
> + case TRANS_DONE:
> + hw->intc |= TRANS_INT_EN;
> + break;
> + case TRANS_FRAG_DONE:
> + hw->intc |= TRANS_INT_EN | FRAG_INT_EN;
> + break;
> + case TRANS_BLOCK_DONE:
> + hw->intc |= TRANS_INT_EN | BLK_INT_EN;
> + break;
> + case LIST_DONE:
> + hw->intc |= LIST_INT_EN;
> + break;
> + case CONFIG_ERR:
> + hw->intc |= CFG_ERROR_INT_EN;
> + break;
> + default:
> + dev_err(sdev->dma_dev.dev, "set irq mode failed\n");
that seems a wrong log to me, you got invalid irq_mode...
> +struct dma_async_tx_descriptor *sprd_dma_prep_dma_memcpy(struct dma_chan *chan,
> + dma_addr_t dest,
> + dma_addr_t src,
> + size_t len,
> + unsigned long flags)
> +{
> + struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
> + struct sprd_dma_desc *sdesc;
> + int ret;
> +
> + sdesc = kzalloc(sizeof(struct sprd_dma_desc), GFP_ATOMIC);
GFP_NOWAIT pls
> +static int sprd_dma_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct sprd_dma_dev *sdev;
> + struct sprd_dma_chn *dma_chn;
> + struct resource *res;
> + u32 chn_count;
> + int ret, i;
> +
> + ret = of_property_read_u32(np, "#dma-channels", &chn_count);
> + if (ret) {
> + dev_err(&pdev->dev, "get dma channels count failed\n");
> + return ret;
> + }
> +
> + sdev = devm_kzalloc(&pdev->dev, (sizeof(*sdev) +
> + (sizeof(struct sprd_dma_chn) * chn_count)),
> + GFP_KERNEL);
> + if (!sdev)
> + return -ENOMEM;
> +
> + sdev->clk = devm_clk_get(&pdev->dev, "enable");
> + if (IS_ERR(sdev->clk)) {
> + dev_err(&pdev->dev, "get enable clock failed\n");
> + return PTR_ERR(sdev->clk);
> + }
> +
> + /* ashb clock is optional for AGCP DMA */
> + sdev->ashb_clk = devm_clk_get(&pdev->dev, "ashb_eb");
> + if (IS_ERR(sdev->ashb_clk))
> + dev_warn(&pdev->dev, "no optional ashb eb clock\n");
> +
> + sdev->irq = platform_get_irq(pdev, 0);
> + if (sdev->irq > 0) {
> + ret = devm_request_irq(&pdev->dev, sdev->irq, dma_irq_handle,
> + 0, "sprd_dma", (void *)sdev);
so after this your driver should be able to handle the urq, are you ready
for that, I think not
> +static int sprd_dma_remove(struct platform_device *pdev)
> +{
> + struct sprd_dma_dev *sdev = platform_get_drvdata(pdev);
> + int ret;
> +
> + ret = pm_runtime_get_sync(&pdev->dev);
> + if (ret < 0)
> + return ret;
> +
> + dma_async_device_unregister(&sdev->dma_dev);
> + sprd_dma_disable(sdev);
and irq is not freed, how do you guarantee that irqs are not scheduled
anymore and all tasklets running have completed and cant be further
scheduled?
> +static int __init sprd_dma_init(void)
> +{
> + return platform_driver_register(&sprd_dma_driver);
> +}
> +arch_initcall_sync(sprd_dma_init);
> +
> +static void __exit sprd_dma_exit(void)
> +{
> + platform_driver_unregister(&sprd_dma_driver);
> +}
> +module_exit(sprd_dma_exit);
module_platform_driver() pls
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("DMA driver for Spreadtrum");
> +MODULE_AUTHOR("Baolin Wang <baolin.wang@xxxxxxxxxxxxxx>");
no MODULE_ALIAS?
--
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
