Jerome Brunet <jbrunet@xxxxxxxxxxxx> writes: > This patchset feature updates around mmc. It is linked to this series [0] > but does not strictly depends on it. It adds: > > * The regulator settling times for the gpio regulator of nanopi-k2 and > the libretech-cc. > * UHS modes for the p20x, nanopi-k2 and the libretech-cc > * clk-gate pins: these are the pinmuxes used for the clk-stop work > around explained here [1] > > It also removes cap-sd-highspeed from eMMC nodes. > > Special note on SDR104: > While the PCB of the p200 and the libretech-cc does not seems to handle > SDR104 completely, the nanopi-k2 seems to be handling it correctly. > > The patch enabling this mode on the nanopi-k2 is the last one of this > series. It should propabably be left out until more people can test > sdr104 on the nanopi-k2 > > This series has been tested on the gxbb-200, the gxbb-nanopi-k2 and the > gxl-s905x-libretech-cc > > Changes since v2 [3]: > * Rebase on Kevin's v4.14/dt64 branch > > Changes since v1 [2]: > * Reorder patches to put fixes first, then enhancements > * Fix error in the SDIO clk_gate pins (GPIOX_5 instead GPIOX_4) > > [0]: https://lkml.kernel.org/r/20170828142915.27020-1-jbrunet@xxxxxxxxxxxx > [1]: https://lkml.kernel.org/r/20170821160301.21899-11-jbrunet@xxxxxxxxxxxx > [2]: https://lkml.kernel.org/r/20170804180816.18737-1-jbrunet@xxxxxxxxxxxx > [3]: https://lkml.kernel.org/r/20170821160637.22456-1-jbrunet@xxxxxxxxxxxx > > Jerome Brunet (9): > ARM64: dts: meson-gx: Use correct mmc clock source 0 > ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes > ARM64: dts: meson: add mmc clk gate pins > ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times > ARM64: dts: meson-gxl: libretech-cc: add card regulator settle times > ARM64: dts: meson-gxl: libretech-cc: enable high speed modes > ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modes > ARM64: dts: meson-gxbb: nanopi-k2: enable sdcard UHS modes > ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode Applied to v4.14/dt64, and submitted to arm-soc. It may miss this merge window, but if it does, we can submit for the first round of fixes after -rc1 is out. Thanks, Kevin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
