On Sat, Sep 02, 2017 at 03:01:57PM +0800, icenowy@xxxxxxx wrote:
> 在 2017-09-02 00:30，Philipp Rossak 写道：
> > From: Philipp Rossak <embed3d@xxxxxxxxx>
> >
> > The WiFi side of the AP6212 WiFi/BT combo module is connected to
> > mmc1. There are also GPIOs for enable and interrupts.
> >
> > Enable WiFi on this board by enabling mmc1 and adding the power
> > sequencing clocks and GPIO, as well as the chip's interrupt line.
> >
> > Signed-off-by: Philipp Rossak <embed3d@xxxxxxxxx>
> > ---
> > arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 25
> > +++++++++++++++++++++++++
> > 1 file changed, 25 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> > b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> > index 6256f55..7d18c35 100644
> > --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> > +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> > @@ -48,6 +48,13 @@
> >
> > aliases {
> > serial1 = &uart3;
> > + ethernet1 = &sdio_wifi;
>
> When the Wi-Fi module itself has fixed MAC address, there's
> no need for such an alias.
But the description is also accurate, which is what matters in the DT.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Attachment:
signature.asc
Description: PGP signature
