From: Philipp Rossak <embed3d@xxxxxxxxx> This is v2 of my Enable hardware for Nanopi M1 & Nanopi M1 Plus Patchseries. Changes since v1: - removed pincrtl node from power sequence - removed vqmmc-supply - changed ap6212 label to sdio_wifi - removed vqmmc-supply & pincrtl node for powersequence on Bananapi M2 Plus - Droped patches for the IR controller & UART that are allready queued for 4.15 - Droped dwmac-sun8i patches Original cover letter from v1: This Patchseries enables the IR controller and the dwmac-sun8i on the Friendlyarm Nanopi M1 and Friendlyarm Nanopi M1 Plus boards. On the Nanopi M1 Plus additionally the BT/Wifi module is activated. Philipp Rossak (2): ARM: dts: sun8i: h3: Enable AP6212 WiFi on mmc1 on Nanopi M1 Plus ARM: dts: sun8i: h3: Improved Wifi bindings on Bananapi M2 Plus arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 7 ------- arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 25 +++++++++++++++++++++++++ 2 files changed, 25 insertions(+), 7 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
