On Fri, Sep 01, 2017 at 08:58:17AM +0200, Florian Eckert wrote: > Add the lantiq cpu temperature sensor support for xrx200. > > Signed-off-by: Florian Eckert <fe@xxxxxxxxxx> Applied to hwmon-next. Thanks, Guenter > --- > v2: > - remove default in Makefile > - fix spelling > - removing first read delay, because temperature value is not read during boot > anymore > - change calculation, compiler should to the optimization > - remove unnecessary initialization > - use new devm_hwmon_device_register_with_info API > - use module_platform_driver function > > v3: > - sort includes in alphabetic order > - add missing linux/bitops.h include > - fix alignment > - fix switch case indentation > - use octal file permission instead of S_IRUGO > - set hwmon device name to "ltq_cputemp" > - enable temperature chip before hwmon registration > - remove release function registrate ltq_cputemp_disable() > with devm_add_action > - remove init_ltq_cputemp and clean_ltq_cputemp not used > overlooked it on v2 > > drivers/hwmon/Kconfig | 7 ++ > drivers/hwmon/Makefile | 1 + > drivers/hwmon/ltq-cputemp.c | 163 ++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 171 insertions(+) > create mode 100644 drivers/hwmon/ltq-cputemp.c > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 5ef2814345ef..218332f0e913 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -790,6 +790,13 @@ config SENSORS_LTC4261 > This driver can also be built as a module. If so, the module will > be called ltc4261. > > +config SENSORS_LTQ_CPUTEMP > + bool "Lantiq cpu temperature sensor driver" > + depends on LANTIQ > + help > + If you say yes here you get support for the temperature > + sensor inside your CPU. > + > config SENSORS_MAX1111 > tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" > depends on SPI_MASTER > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index d4641a9f16c1..c84d9784be98 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -110,6 +110,7 @@ obj-$(CONFIG_SENSORS_LTC4222) += ltc4222.o > obj-$(CONFIG_SENSORS_LTC4245) += ltc4245.o > obj-$(CONFIG_SENSORS_LTC4260) += ltc4260.o > obj-$(CONFIG_SENSORS_LTC4261) += ltc4261.o > +obj-$(CONFIG_SENSORS_LTQ_CPUTEMP) += ltq-cputemp.o > obj-$(CONFIG_SENSORS_MAX1111) += max1111.o > obj-$(CONFIG_SENSORS_MAX16065) += max16065.o > obj-$(CONFIG_SENSORS_MAX1619) += max1619.o > diff --git a/drivers/hwmon/ltq-cputemp.c b/drivers/hwmon/ltq-cputemp.c > new file mode 100644 > index 000000000000..1d33f94594c1 > --- /dev/null > +++ b/drivers/hwmon/ltq-cputemp.c > @@ -0,0 +1,163 @@ > +/* Lantiq cpu temperature sensor driver > + * > + * Copyright (C) 2017 Florian Eckert <fe@xxxxxxxxxx> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version > + * > + * This program is distributed in the hope that it will be useful > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, see <http://www.gnu.org/licenses/> > + */ > + > +#include <linux/bitops.h> > +#include <linux/delay.h> > +#include <linux/hwmon.h> > +#include <linux/hwmon-sysfs.h> > +#include <linux/init.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > + > +#include <lantiq_soc.h> > + > +/* gphy1 configuration register contains cpu temperature */ > +#define CGU_GPHY1_CR 0x0040 > +#define CGU_TEMP_PD BIT(19) > + > +static void ltq_cputemp_enable(void) > +{ > + ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR); > +} > + > +static void ltq_cputemp_disable(void *data) > +{ > + ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) & ~CGU_TEMP_PD, CGU_GPHY1_CR); > +} > + > +static int ltq_read(struct device *dev, enum hwmon_sensor_types type, > + u32 attr, int channel, long *temp) > +{ > + int value; > + > + switch (attr) { > + case hwmon_temp_input: > + /* get the temperature including one decimal place */ > + value = (ltq_cgu_r32(CGU_GPHY1_CR) >> 9) & 0x01FF; > + value = value * 5; > + /* range -38 to +154 °C, register value zero is -38.0 °C */ > + value -= 380; > + /* scale temp to millidegree */ > + value = value * 100; > + break; > + default: > + return -EOPNOTSUPP; > + } > + > + *temp = value; > + return 0; > +} > + > +static umode_t ltq_is_visible(const void *_data, enum hwmon_sensor_types type, > + u32 attr, int channel) > +{ > + if (type != hwmon_temp) > + return 0; > + > + switch (attr) { > + case hwmon_temp_input: > + return 0444; > + default: > + return 0; > + } > +} > + > +static const u32 ltq_chip_config[] = { > + HWMON_C_REGISTER_TZ, > + 0 > +}; > + > +static const struct hwmon_channel_info ltq_chip = { > + .type = hwmon_chip, > + .config = ltq_chip_config, > +}; > + > +static const u32 ltq_temp_config[] = { > + HWMON_T_INPUT, > + 0 > +}; > + > +static const struct hwmon_channel_info ltq_temp = { > + .type = hwmon_temp, > + .config = ltq_temp_config, > +}; > + > +static const struct hwmon_channel_info *ltq_info[] = { > + <q_chip, > + <q_temp, > + NULL > +}; > + > +static const struct hwmon_ops ltq_hwmon_ops = { > + .is_visible = ltq_is_visible, > + .read = ltq_read, > +}; > + > +static const struct hwmon_chip_info ltq_chip_info = { > + .ops = <q_hwmon_ops, > + .info = ltq_info, > +}; > + > +static int ltq_cputemp_probe(struct platform_device *pdev) > +{ > + struct device *hwmon_dev; > + int err = 0; > + > + /* available on vr9 v1.2 SoCs only */ > + if (ltq_soc_type() != SOC_TYPE_VR9_2) > + return -ENODEV; > + > + err = devm_add_action(&pdev->dev, ltq_cputemp_disable, NULL); > + if (err) > + return err; > + > + ltq_cputemp_enable(); > + > + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, > + "ltq_cputemp", > + NULL, > + <q_chip_info, > + NULL); > + > + if (IS_ERR(hwmon_dev)) { > + dev_err(&pdev->dev, "Failed to register as hwmon device"); > + return PTR_ERR(hwmon_dev); > + } > + > + return 0; > +} > + > +const struct of_device_id ltq_cputemp_match[] = { > + { .compatible = "lantiq,cputemp" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, ltq_cputemp_match); > + > +static struct platform_driver ltq_cputemp_driver = { > + .probe = ltq_cputemp_probe, > + .driver = { > + .name = "ltq-cputemp", > + .of_match_table = ltq_cputemp_match, > + }, > +}; > + > +module_platform_driver(ltq_cputemp_driver); > + > +MODULE_AUTHOR("Florian Eckert <fe@xxxxxxxxxx>"); > +MODULE_DESCRIPTION("Lantiq cpu temperature sensor driver"); > +MODULE_LICENSE("GPL"); > -- > 2.11.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
