Re: [PATCH v6 1/5] v4l: fwnode: Move KernelDoc documentation to the header

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 30/08/17 13:49, Sakari Ailus wrote:
> In V4L2 the practice is to have the KernelDoc documentation in the header
> and not in .c source code files. This consequientally makes the V4L2
> fwnode function documentation part of the Media documentation build.
> 
> Also correct the link related function and argument naming in
> documentation.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>

Acked-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>

Regards,

	Hans

> ---
>  drivers/media/v4l2-core/v4l2-fwnode.c | 75 --------------------------------
>  include/media/v4l2-fwnode.h           | 81 ++++++++++++++++++++++++++++++++++-
>  2 files changed, 80 insertions(+), 76 deletions(-)
> 
> diff --git a/drivers/media/v4l2-core/v4l2-fwnode.c b/drivers/media/v4l2-core/v4l2-fwnode.c
> index 40b2fbfe8865..706f9e7b90f1 100644
> --- a/drivers/media/v4l2-core/v4l2-fwnode.c
> +++ b/drivers/media/v4l2-core/v4l2-fwnode.c
> @@ -181,25 +181,6 @@ v4l2_fwnode_endpoint_parse_csi1_bus(struct fwnode_handle *fwnode,
>  		vep->bus_type = V4L2_MBUS_CSI1;
>  }
>  
> -/**
> - * v4l2_fwnode_endpoint_parse() - parse all fwnode node properties
> - * @fwnode: pointer to the endpoint's fwnode handle
> - * @vep: pointer to the V4L2 fwnode data structure
> - *
> - * All properties are optional. If none are found, we don't set any flags. This
> - * means the port has a static configuration and no properties have to be
> - * specified explicitly. If any properties that identify the bus as parallel
> - * are found and slave-mode isn't set, we set V4L2_MBUS_MASTER. Similarly, if
> - * we recognise the bus as serial CSI-2 and clock-noncontinuous isn't set, we
> - * set the V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag. The caller should hold a
> - * reference to @fwnode.
> - *
> - * NOTE: This function does not parse properties the size of which is variable
> - * without a low fixed limit. Please use v4l2_fwnode_endpoint_alloc_parse() in
> - * new drivers instead.
> - *
> - * Return: 0 on success or a negative error code on failure.
> - */
>  int v4l2_fwnode_endpoint_parse(struct fwnode_handle *fwnode,
>  			       struct v4l2_fwnode_endpoint *vep)
>  {
> @@ -239,14 +220,6 @@ int v4l2_fwnode_endpoint_parse(struct fwnode_handle *fwnode,
>  }
>  EXPORT_SYMBOL_GPL(v4l2_fwnode_endpoint_parse);
>  
> -/*
> - * v4l2_fwnode_endpoint_free() - free the V4L2 fwnode acquired by
> - * v4l2_fwnode_endpoint_alloc_parse()
> - * @vep - the V4L2 fwnode the resources of which are to be released
> - *
> - * It is safe to call this function with NULL argument or on a V4L2 fwnode the
> - * parsing of which failed.
> - */
>  void v4l2_fwnode_endpoint_free(struct v4l2_fwnode_endpoint *vep)
>  {
>  	if (IS_ERR_OR_NULL(vep))
> @@ -257,29 +230,6 @@ void v4l2_fwnode_endpoint_free(struct v4l2_fwnode_endpoint *vep)
>  }
>  EXPORT_SYMBOL_GPL(v4l2_fwnode_endpoint_free);
>  
> -/**
> - * v4l2_fwnode_endpoint_alloc_parse() - parse all fwnode node properties
> - * @fwnode: pointer to the endpoint's fwnode handle
> - *
> - * All properties are optional. If none are found, we don't set any flags. This
> - * means the port has a static configuration and no properties have to be
> - * specified explicitly. If any properties that identify the bus as parallel
> - * are found and slave-mode isn't set, we set V4L2_MBUS_MASTER. Similarly, if
> - * we recognise the bus as serial CSI-2 and clock-noncontinuous isn't set, we
> - * set the V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag. The caller should hold a
> - * reference to @fwnode.
> - *
> - * v4l2_fwnode_endpoint_alloc_parse() has two important differences to
> - * v4l2_fwnode_endpoint_parse():
> - *
> - * 1. It also parses variable size data.
> - *
> - * 2. The memory it has allocated to store the variable size data must be freed
> - *    using v4l2_fwnode_endpoint_free() when no longer needed.
> - *
> - * Return: Pointer to v4l2_fwnode_endpoint if successful, on an error pointer
> - * on error.
> - */
>  struct v4l2_fwnode_endpoint *v4l2_fwnode_endpoint_alloc_parse(
>  	struct fwnode_handle *fwnode)
>  {
> @@ -322,24 +272,6 @@ struct v4l2_fwnode_endpoint *v4l2_fwnode_endpoint_alloc_parse(
>  }
>  EXPORT_SYMBOL_GPL(v4l2_fwnode_endpoint_alloc_parse);
>  
> -/**
> - * v4l2_fwnode_endpoint_parse_link() - parse a link between two endpoints
> - * @__fwnode: pointer to the endpoint's fwnode at the local end of the link
> - * @link: pointer to the V4L2 fwnode link data structure
> - *
> - * Fill the link structure with the local and remote nodes and port numbers.
> - * The local_node and remote_node fields are set to point to the local and
> - * remote port's parent nodes respectively (the port parent node being the
> - * parent node of the port node if that node isn't a 'ports' node, or the
> - * grand-parent node of the port node otherwise).
> - *
> - * A reference is taken to both the local and remote nodes, the caller must use
> - * v4l2_fwnode_endpoint_put_link() to drop the references when done with the
> - * link.
> - *
> - * Return: 0 on success, or -ENOLINK if the remote endpoint fwnode can't be
> - * found.
> - */
>  int v4l2_fwnode_parse_link(struct fwnode_handle *__fwnode,
>  			   struct v4l2_fwnode_link *link)
>  {
> @@ -374,13 +306,6 @@ int v4l2_fwnode_parse_link(struct fwnode_handle *__fwnode,
>  }
>  EXPORT_SYMBOL_GPL(v4l2_fwnode_parse_link);
>  
> -/**
> - * v4l2_fwnode_put_link() - drop references to nodes in a link
> - * @link: pointer to the V4L2 fwnode link data structure
> - *
> - * Drop references to the local and remote nodes in the link. This function
> - * must be called on every link parsed with v4l2_fwnode_parse_link().
> - */
>  void v4l2_fwnode_put_link(struct v4l2_fwnode_link *link)
>  {
>  	fwnode_handle_put(link->local_node);
> diff --git a/include/media/v4l2-fwnode.h b/include/media/v4l2-fwnode.h
> index 7adec9851d9e..68eb22ba571b 100644
> --- a/include/media/v4l2-fwnode.h
> +++ b/include/media/v4l2-fwnode.h
> @@ -113,13 +113,92 @@ struct v4l2_fwnode_link {
>  	unsigned int remote_port;
>  };
>  
> +/**
> + * v4l2_fwnode_endpoint_parse() - parse all fwnode node properties
> + * @fwnode: pointer to the endpoint's fwnode handle
> + * @vep: pointer to the V4L2 fwnode data structure
> + *
> + * All properties are optional. If none are found, we don't set any flags. This
> + * means the port has a static configuration and no properties have to be
> + * specified explicitly. If any properties that identify the bus as parallel
> + * are found and slave-mode isn't set, we set V4L2_MBUS_MASTER. Similarly, if
> + * we recognise the bus as serial CSI-2 and clock-noncontinuous isn't set, we
> + * set the V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag. The caller should hold a
> + * reference to @fwnode.
> + *
> + * NOTE: This function does not parse properties the size of which is variable
> + * without a low fixed limit. Please use v4l2_fwnode_endpoint_alloc_parse() in
> + * new drivers instead.
> + *
> + * Return: 0 on success or a negative error code on failure.
> + */
>  int v4l2_fwnode_endpoint_parse(struct fwnode_handle *fwnode,
>  			       struct v4l2_fwnode_endpoint *vep);
> +
> +/*
> + * v4l2_fwnode_endpoint_free() - free the V4L2 fwnode acquired by
> + * v4l2_fwnode_endpoint_alloc_parse()
> + * @vep - the V4L2 fwnode the resources of which are to be released
> + *
> + * It is safe to call this function with NULL argument or on a V4L2 fwnode the
> + * parsing of which failed.
> + */
> +void v4l2_fwnode_endpoint_free(struct v4l2_fwnode_endpoint *vep);
> +
> +/**
> + * v4l2_fwnode_endpoint_alloc_parse() - parse all fwnode node properties
> + * @fwnode: pointer to the endpoint's fwnode handle
> + *
> + * All properties are optional. If none are found, we don't set any flags. This
> + * means the port has a static configuration and no properties have to be
> + * specified explicitly. If any properties that identify the bus as parallel
> + * are found and slave-mode isn't set, we set V4L2_MBUS_MASTER. Similarly, if
> + * we recognise the bus as serial CSI-2 and clock-noncontinuous isn't set, we
> + * set the V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag. The caller should hold a
> + * reference to @fwnode.
> + *
> + * v4l2_fwnode_endpoint_alloc_parse() has two important differences to
> + * v4l2_fwnode_endpoint_parse():
> + *
> + * 1. It also parses variable size data.
> + *
> + * 2. The memory it has allocated to store the variable size data must be freed
> + *    using v4l2_fwnode_endpoint_free() when no longer needed.
> + *
> + * Return: Pointer to v4l2_fwnode_endpoint if successful, on an error pointer
> + * on error.
> + */
>  struct v4l2_fwnode_endpoint *v4l2_fwnode_endpoint_alloc_parse(
>  	struct fwnode_handle *fwnode);
> -void v4l2_fwnode_endpoint_free(struct v4l2_fwnode_endpoint *vep);
> +
> +/**
> + * v4l2_fwnode_parse_link() - parse a link between two endpoints
> + * @fwnode: pointer to the endpoint's fwnode at the local end of the link
> + * @link: pointer to the V4L2 fwnode link data structure
> + *
> + * Fill the link structure with the local and remote nodes and port numbers.
> + * The local_node and remote_node fields are set to point to the local and
> + * remote port's parent nodes respectively (the port parent node being the
> + * parent node of the port node if that node isn't a 'ports' node, or the
> + * grand-parent node of the port node otherwise).
> + *
> + * A reference is taken to both the local and remote nodes, the caller must use
> + * v4l2_fwnode_put_link() to drop the references when done with the
> + * link.
> + *
> + * Return: 0 on success, or -ENOLINK if the remote endpoint fwnode can't be
> + * found.
> + */
>  int v4l2_fwnode_parse_link(struct fwnode_handle *fwnode,
>  			   struct v4l2_fwnode_link *link);
> +
> +/**
> + * v4l2_fwnode_put_link() - drop references to nodes in a link
> + * @link: pointer to the V4L2 fwnode link data structure
> + *
> + * Drop references to the local and remote nodes in the link. This function
> + * must be called on every link parsed with v4l2_fwnode_parse_link().
> + */
>  void v4l2_fwnode_put_link(struct v4l2_fwnode_link *link);
>  
>  #endif /* _V4L2_FWNODE_H */
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux