Hi Andrew, Thanks for the update. On 08/28/2017 02:17 AM, Andrew Jeffery wrote: > Hello, > > LEDs controlled by Baseboard Management Controllers (BMCs) are sometimes > required to retain their state across BMC resets. BMC resets may occur whilst > the host is alive, thus the chassis and host system remain powered up. In these > two patches I define an new devicetree property to describe the behaviour for > GPIO LEDs and add support to the leds-gpio driver. > > Changes in v2: > * Expand BMC to Baseboard Management Controller at least once in each commit > message. > > v1: https://lkml.org/lkml/2017/8/25/44 > > Please review! > > Cheers, > > Andrew > > Andrew Jeffery (2): > dt-bindings: leds: gpio: Add optional retain-state-shutdown property > leds: gpio: Allow LED to retain state at shutdown > > Documentation/devicetree/bindings/leds/leds-gpio.txt | 3 +++ > drivers/leds/leds-gpio.c | 7 ++++++- > include/linux/leds.h | 2 ++ > 3 files changed, 11 insertions(+), 1 deletion(-) > Patchset applied to the for-next branch of linux-leds.git, thanks. -- Best regards, Jacek Anaszewski -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
