On Thu, Aug 24, 2017 at 06:53:50AM -0400, Simon Horman wrote: > On Thu, Aug 24, 2017 at 10:48:39AM +0200, Jacopo Mondi wrote: > > Hello Simon, > > now that RZ/A1 pin controller is merged, it's time to enable some peripheral > > devices on GR-Peach has it has been done for Genmai and RSK boards. > > > > The series is based on Simon's "renesas-dt2-for-v4.14" tag release, so it should > > be ideally applied after v4.14-rc1 is out, as it needs pin controller nodes to > > be defined in r7s72100.dtsi. > > > > Patch 2/4 enables EHTER interface, even if I've not been able to exchange any > > traffic on that. I can set the ip address and probe the device and double > > checked the pin configuration process against u-boot sources (where the > > interface is working instead). Sending the patch anyway and let you decide what > > to do with that. > > > > Thanks > > j > > > > Jacopo Mondi (4): > > arm: dts: gr-peach: Remove empty line > > arm: dts: gr-peach: Add SCIF2 pin group > > arm: dts: gr-peach: Add ETHER pin group > > arm: dts: gr-peach: Add user led device nodes > > Thanks I have applied the 1st, 2nd and 4th (non-ETHER) patches above for v4.15. > I am leaving the 3rd (ETHER) patch pending resolution of the review > provided by Geert. BTW, the prefix these patches should start with "ARM:". I fixed this when applying the patches described above. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
