Hello Simon, now that RZ/A1 pin controller is merged, it's time to enable some peripheral devices on GR-Peach has it has been done for Genmai and RSK boards. The series is based on Simon's "renesas-dt2-for-v4.14" tag release, so it should be ideally applied after v4.14-rc1 is out, as it needs pin controller nodes to be defined in r7s72100.dtsi. Patch 2/4 enables EHTER interface, even if I've not been able to exchange any traffic on that. I can set the ip address and probe the device and double checked the pin configuration process against u-boot sources (where the interface is working instead). Sending the patch anyway and let you decide what to do with that. Thanks j Jacopo Mondi (4): arm: dts: gr-peach: Remove empty line arm: dts: gr-peach: Add SCIF2 pin group arm: dts: gr-peach: Add ETHER pin group arm: dts: gr-peach: Add user led device nodes arch/arm/boot/dts/r7s72100-gr-peach.dts | 57 ++++++++++++++++++++++++++++++++- 1 file changed, 56 insertions(+), 1 deletion(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
