The mt8173-mtu3.txt actually holds the bindings for all mediatek SoCs with usb3 DRD IP, so add a generic compatible and change the name to mediatek,mtu3.txt. Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> --- .../usb/{mt8173-mtu3.txt => mediatek,mtu3.txt} | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) rename Documentation/devicetree/bindings/usb/{mt8173-mtu3.txt => mediatek,mtu3.txt} (92%) diff --git a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt similarity index 92% rename from Documentation/devicetree/bindings/usb/mt8173-mtu3.txt rename to Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index 1d7c3bc..545251e 100644 --- a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -1,7 +1,11 @@ The device node for Mediatek USB3.0 DRD controller Required properties: - - compatible : should be "mediatek,mt8173-mtu3" + - compatible : should be "mediatek,soc-model-mtu3", "mediatek,mtu3", + soc-model is the name of SoC, such as mt8173, mt2712 etc, + when using "mediatek,mtu3" compatible string, you need SoC specific + ones in addition, one of: + - "mediatek,mt8173-mtu3" - reg : specifies physical base address and size of the registers - reg-names: should be "mac" for device IP and "ippc" for IP port control - interrupts : interrupt used by the device IP -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html