Hayashi-san 2017-07-05 20:53 GMT+09:00 Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>: > Add nodes of thermal monitor and thermal zone for UniPhier PXs2 SoC. > The thermal monitor is included in sysctrl. > Furthermore, add cpuN labels for reference in cooling-device property. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx> > --- Please add socionext,tmod-calibration in case the efuse is not brown. > > + thermal-zones { > + cpu_thermal { > + polling-delay-passive = <250>; /* 250ms */ > + polling-delay = <1000>; /* 1000ms */ > + thermal-sensors = <&pvtctl>; > + > + trips { > + cpu_crit: cpu_crit { > + temperature = <95000>; /* 95C */ > + hysteresis = <2000>; > + type = "critical"; > + }; > + cpu_alert: cpu_alert { > + temperature = <85000>; /* 85C */ > + hysteresis = <2000>; > + type = "passive"; > + }; > + }; > + > + cooling-maps { > + map { > + trip = <&cpu_alert>; > + cooling-device = <&cpu0 (-1) (-1)>; > + }; After all, I decided to use dt-bindings headers. Could you use THERMAL_NO_LIMIT for clarification? -- Best Regards Masahiro Yamada -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html