[PATCH V2] ARM: dts: imx6qdl-sabresd: correct gpio key's active state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




>From schematic, the power, vol+/- key's active state is low,
so we need to set the gpio flag to active low.

Signed-off-by: Anson Huang <b20788@xxxxxxxxxxxxx>
---
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 91e5dd4..96a921b 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -10,6 +10,7 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
@@ -58,21 +59,21 @@
 
 		power {
 			label = "Power Button";
-			gpios = <&gpio3 29 0>;
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
 			gpio-key,wakeup;
 			linux,code = <KEY_POWER>;
 		};
 
 		volume-up {
 			label = "Volume Up";
-			gpios = <&gpio1 4 0>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 			gpio-key,wakeup;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
 		volume-down {
 			label = "Volume Down";
-			gpios = <&gpio1 5 0>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 			gpio-key,wakeup;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux