> -----Original Message----- > From: U-Boot [mailto:u-boot-bounces@xxxxxxxxxxxxx] On Behalf Of > yinbo.zhu@xxxxxxx > Sent: Thursday, July 27, 2017 3:19 PM > To: u-boot@xxxxxxxxxxxxx > Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS > <devicetree@xxxxxxxxxxxxxxx>; Mihai Emilian Bantea <mihai.bantea@xxxxxxx>; > Horia Geantă <horia.geanta@xxxxxxx>; Marc Zyngier > <marc.zyngier@xxxxxxx>; Gang Liu <gang.liu@xxxxxxx>; open list <linux- > kernel@xxxxxxxxxxxxxxx>; Scott Wood <oss@xxxxxxxxxxxx>; Rajat Srivastava > <rajat.srivastava@xxxxxxx>; Yinbo Zhu <yinbo.zhu@xxxxxxx>; moderated > list:ARM64 PORT (AARCH64 ARCHITECTURE) <linux-arm- > kernel@xxxxxxxxxxxxxxxxxxx> > Subject: [U-Boot] [PATCH] config: ls1012aqds: Add USB EHCI support for > ls1012aqds > > From: Rajesh Bhagat <rajesh.bhagat@xxxxxxx> > > Add USB EHCI support for ls1012aqds platform > > Signed-off-by: Rajat Srivastava <rajat.srivastava@xxxxxxx> > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@xxxxxxx> > Signed-off-by: yinbo.zhu <yinbo.zhu@xxxxxxx> > --- > arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 + > include/configs/ls1012aqds.h | 2 ++ > include/usb/ehci-ci.h | 2 +- > 3 files changed, 4 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h > b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h > index 8ad199f..4afc338 100644 > --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h > +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h > @@ -35,6 +35,7 @@ > #define CONFIG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + > 0x01f00000) > #define CONFIG_SYS_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + > 0x02000000) > #define CONFIG_SYS_XHCI_USB3_ADDR (CONFIG_SYS_IMMR + > 0x02100000) > +#define CONFIG_SYS_EHCI_USB1_ADDR (CONFIG_SYS_IMMR + > 0x07600000) > #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + > 0x2400000) > #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + > 0x2500000) > #define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_IMMR + > 0x2600000) > diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h > index 5b8500b..55f2578 100644 > --- a/include/configs/ls1012aqds.h > +++ b/include/configs/ls1012aqds.h > @@ -115,6 +115,8 @@ > > #ifdef CONFIG_HAS_FSL_DR_USB > #define CONFIG_USB_EHCI_FSL > +#define CONFIG_USB_ULPI > +#define CONFIG_USB_ULPI_VIEWPORT > #define CONFIG_EHCI_HCD_INIT_AFTER_RESET > #endif > > diff --git a/include/usb/ehci-ci.h b/include/usb/ehci-ci.h > index 847b698..cd3eb47 100644 > --- a/include/usb/ehci-ci.h > +++ b/include/usb/ehci-ci.h > @@ -156,7 +156,7 @@ > #elif defined(CONFIG_MPC85xx) > #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC85xx_USB1_ADDR > #define CONFIG_SYS_FSL_USB2_ADDR CONFIG_SYS_MPC85xx_USB2_ADDR > -#elif defined(CONFIG_ARCH_LS1021A) > +#elif defined(CONFIG_LS102XA) || defined(CONFIG_ARCH_LS1012A) Why CONFIG_ARCH_LS1021A has been replaced by CONFIG_LS102XA? -prabhakar ��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
