TI's implementation of sdhci controller used in DRA7 SoC's uses
POWER_CONTROL register for configuring IO voltage and not
for core voltage (vdd) which is it's intended use. Add a quirk
to indicate broken POWER_CONTROL register.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
drivers/mmc/host/sdhci.c | 6 ++++++
drivers/mmc/host/sdhci.h | 2 ++
2 files changed, 8 insertions(+)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index d5050ec42481..a7465a56e6b5 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1419,6 +1419,9 @@ static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ if (host->quirks2 & SDHCI_QUIRK2_BROKEN_POWER_CONTROL)
+ return;
+
if (mode != MMC_POWER_OFF)
sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
else
@@ -1430,6 +1433,9 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
{
u8 pwr = 0;
+ if (host->quirks2 & SDHCI_QUIRK2_BROKEN_POWER_CONTROL)
+ return;
+
if (mode != MMC_POWER_OFF) {
switch (1 << vdd) {
case MMC_VDD_165_195:
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 39c7a2723906..ba94cca7c892 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -439,6 +439,8 @@ struct sdhci_host {
#define SDHCI_QUIRK2_NO_CRC_STRIPPING (1<<16)
/* Controller has bad caps bits, but really supports DMA */
#define SDHCI_QUIRK2_FORCE_ADMA (1<<17)
+/* Controller uses POWER_CONTROL for managing IO voltage and not core voltage */
+#define SDHCI_QUIRK2_BROKEN_POWER_CONTROL (1<<18)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
