This adds the required specifications of reset-gpios on snow to enable wifi.
The wifi module is always powered, but it has three more signals needed:
- Enable line (active high)
- Reset line (active low)
- 32kHz reference clock
The enable and reset lines are in practice quite similar (i.e. both
need to be 1 for the module to be enabled), so treat them both as
"reset gpios". The clock is specified using the new clock property on
MMC, which due to lack of append options right now has to duplicate the
first two clocks that are SoC generic.
Also, fix the pinctrl setting (that has moved from slot node to host
controller node), and add the two gpio lines to the pinctrl setup.
Signed-off-by: Olof Johansson <olof@xxxxxxxxx>
---
arch/arm/boot/dts/exynos5250-cros-common.dtsi | 17 ++++++++++++++++-
arch/arm/boot/dts/exynos5250-snow.dts | 11 +++++++++--
2 files changed, 25 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 2c1560d..b72f342 100644
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@ -34,6 +34,20 @@
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ wifi_en: wifi-en {
+ samsung,pins = "gpx0-1";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ wifi_rst: wifi-rst {
+ samsung,pins = "gpx0-2";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
};
i2c@12C60000 {
@@ -41,7 +55,7 @@
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- max77686@09 {
+ pmic: max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
interrupts = <2 0>;
@@ -284,6 +298,7 @@
num-slots = <1>;
supports-highspeed;
broken-cd;
+ cap-sdio-irq;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 7e45eea..c150483 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -11,6 +11,7 @@
/dts-v1/;
#include "exynos5250.dtsi"
#include "exynos5250-cros-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Google Snow";
@@ -186,9 +187,15 @@
*/
mmc@12230000 {
status = "okay";
+ clocks = <&clock 280>, <&clock 139>, <&pmic 2>;
+ clock-names = "biu", "ciu", "card_ext_clock";
+ card-reset-gpios = <&gpx0 1 GPIO_ACTIVE_LOW>, /* WIFI_EN */
+ <&gpx0 2 GPIO_ACTIVE_LOW>; /* WIFI_RSTn */
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
slot@0 {
- pinctrl-names = "default";
- pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+ reg = <0>;
+ bus-width = <4>;
};
};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
