Update ti,edma binding documentation to reflect 66AK2G specific
properties.
Signed-off-by: Lokesh Vutla <lokeshvutla@xxxxxx>
---
Documentation/devicetree/bindings/dma/ti-edma.txt | 95 +++++++++++++++++++++--
1 file changed, 90 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 18090e7226b4..05fe2931d025 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -9,7 +9,12 @@ execute the actual DMA tansfer.
eDMA3 Channel Controller
Required properties:
-- compatible: "ti,edma3-tpcc" for the channel controller(s)
+--------------------
+- compatible: Should be:
+ - "ti,edma3-tpcc" for the channel controller(s) on OMAP,
+ AM33xx and AM43xx SoCs.
+ - "ti,k2g-edma3-tpcc", "ti,edma3-tpcc" for the
+ channel controller(s) on 66AK2G.
- #dma-cells: Should be set to <2>. The first number is the DMA request
number and the second is the TC the channel is serviced on.
- reg: Memory map of eDMA CC
@@ -19,8 +24,19 @@ Required properties:
- ti,tptcs: List of TPTCs associated with the eDMA in the following form:
<&tptc_phandle TC_priority_number>. The highest priority is 0.
+SoC-specific Required properties:
+--------------------------------
+The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only:
+- ti,hwmods: Name of the hwmods associated to the eDMA CC.
+
+The following are mandatory properties for 66AK2G SoCs only:
+- power-domains:Should contain a phandle to a PM domain provider node
+ and an args specifier containing the device id
+ value. This property is as per the binding,
+ Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+
Optional properties:
-- ti,hwmods: Name of the hwmods associated to the eDMA CC
+-------------------
- ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow
these channels will be SW triggered channels. See example.
- ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
@@ -31,17 +47,34 @@ Optional properties:
eDMA3 Transfer Controller
Required properties:
-- compatible: "ti,edma3-tptc" for the transfer controller(s)
+--------------------
+- compatible: Should be:
+ - "ti,edma3-tptc" for the transfer controller(s) on OMAP,
+ AM33xx and AM43xx SoCs.
+ - "ti,k2g-edma3-tptc", "ti,edma3-tptc" for the
+ transfer controller(s) on 66AK2G.
- reg: Memory map of eDMA TC
- interrupts: Interrupt number for TCerrint.
+SoC-specific Required properties:
+--------------------------------
+The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only:
+- ti,hwmods: Name of the hwmods associated to the eDMA TC.
+
+The following are mandatory properties for 66AK2G SoCs only:
+- power-domains:Should contain a phandle to a PM domain provider node
+ and an args specifier containing the device id
+ value. This property is as per the binding,
+ Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+
Optional properties:
-- ti,hwmods: Name of the hwmods associated to the given eDMA TC
+-------------------
- interrupt-names: "edma3_tcerrint"
------------------------------------------------------------------------------
-Example:
+Examples:
+1.
edma: edma@49000000 {
compatible = "ti,edma3-tpcc";
ti,hwmods = "tpcc";
@@ -109,6 +142,58 @@ mcasp0: mcasp@48038000 {
dma-names = "tx", "rx";
};
+2.
+edma1: edma@02728000 {
+ compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
+ reg = <0x02728000 0x8000>;
+ reg-names = "edma3_cc";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "edma3_ccint", "emda3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>;
+
+ /*
+ * memcpy is disabled, can be enabled with:
+ * ti,edma-memcpy-channels = <12 13 14 15>;
+ * for example.
+ */
+
+ power-domains = <&k2g_pds 0x4f>;
+};
+
+edma1_tptc0: tptc@027b0000 {
+ compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+ reg = <0x027b0000 0x400>;
+ power-domains = <&k2g_pds 0x4f>;
+};
+
+edma1_tptc1: tptc@027b8000 {
+ compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc";
+ reg = <0x027b8000 0x400>;
+ power-domains = <&k2g_pds 0x4f>;
+};
+
+mmc0: mmc@23000000 {
+ compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
+ reg = <0x23000000 0x400>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
+ dmas = <&edma1 24 0>, <&edma1 25 0>;
+ dma-names = "tx", "rx";
+ bus-width = <4>;
+ ti,needs-special-reset;
+ no-1-8-v;
+ max-frequency = <96000000>;
+ power-domains = <&k2g_pds 0xb>;
+ clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
+ clock-names = "fck", "mmchsdb_fck";
+ status = "disabled";
+};
+
------------------------------------------------------------------------------
DEPRECATED binding, new DTS files must use the ti,edma3-tpcc/ti,edma3-tptc
binding.
--
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
