Пятница, 17 января 2014, 11:19 -08:00 от Marc Carino <marc.ceeeee@xxxxxxxxx>:
> Add the UART definitions needed to support earlyprintk on brcmstb machines.
>
> Signed-off-by: Marc Carino <marc.ceeeee@xxxxxxxxx>
> Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
> ---
> arch/arm/Kconfig.debug | 16 +++++++++++++++-
> 1 files changed, 15 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 5765abf..266c699 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -94,6 +94,17 @@ choice
> depends on ARCH_BCM2835
> select DEBUG_UART_PL01X
>
> + config DEBUG_BRCMSTB_UART
> + bool "Use BRCMSTB UART for low-level debug"
> + depends on ARCH_BRCMSTB
> + select DEBUG_UART_8250
> + help
> + Say Y here if you want the debug print routines to direct
> + their output to the first serial port on these devices.
> +
> + If you have a Broadcom STB chip and would like early print
> + messages to appear over the UART, select this option.
> +
> config DEBUG_CLPS711X_UART1
> bool "Kernel low-level debugging messages via UART1"
> depends on ARCH_CLPS711X
> @@ -988,6 +999,7 @@ config DEBUG_UART_PHYS
> default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
> default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
> default 0x20201000 if DEBUG_BCM2835
> + default 0xf0406b00 if DEBUG_BRCMSTB_UART
This should be sorted by address.
---
��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
