[PATCH v4 0/8] ARM: brcmstb: Add Broadcom STB SoC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This patchset contains the board support package for the
Broadcom BCM7445 ARM-based SoC [1]. These changes contain a
minimal set of code needed for a BCM7445-based board to boot
the Linux kernel.

These changes heavily leverage the OF/devicetree framework.

v4:
- make a reboot driver and put it in the drivers folder
- rework DT bindings to leverage 'syscon'
- rework BSP code to use 'syscon' for all register mappings
- misc. tweaks per suggestions from v3

v3:
- rebased to v3.13-rc8
- switched to using 'multi_v7_defconfig'
- eliminated dependence on compile-time peripheral register access
- moved DT node iomap out from 'init_early'
- misc. minor cleanups from mailing-list discussion for v2

v2:
- rebased to v3.13-rc1
- moved implementation to 'mach-bcm' folder
- added CPU init for B15

v1:
- initial submission

[1] http://www.broadcom.com/products/Cable/Cable-Set-Top-Box-Solutions/BCM7445

Marc Carino (8):
  ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
  power: reset: Add reboot driver for brcmstb
  ARM: brcmstb: add debug UART for earlyprintk support
  ARM: do CPU-specific init for Broadcom Brahma15 cores
  ARM: brcmstb: add CPU binding for Broadcom Brahma15
  ARM: brcmstb: add misc. DT bindings for brcmstb
  ARM: brcmstb: gic: add compatible string for Broadcom Brahma15
  ARM: brcmstb: dts: add a reference DTS for Broadcom 7445

 .../devicetree/bindings/arm/brcm-brcmstb.txt       |   95 ++++++
 Documentation/devicetree/bindings/arm/cpus.txt     |    1 +
 Documentation/devicetree/bindings/arm/gic.txt      |    1 +
 arch/arm/Kconfig.debug                             |   16 +-
 arch/arm/boot/dts/bcm7445.dts                      |  111 +++++++
 arch/arm/configs/multi_v7_defconfig                |    1 +
 arch/arm/mach-bcm/Kconfig                          |   14 +
 arch/arm/mach-bcm/Makefile                         |    4 +
 arch/arm/mach-bcm/brcmstb.c                        |  110 +++++++
 arch/arm/mach-bcm/brcmstb.h                        |   38 +++
 arch/arm/mach-bcm/headsmp-brcmstb.S                |   34 ++
 arch/arm/mach-bcm/hotplug-brcmstb.c                |  334 ++++++++++++++++++++
 arch/arm/mm/proc-v7.S                              |   11 +
 drivers/power/reset/Kconfig                        |   10 +
 drivers/power/reset/Makefile                       |    1 +
 drivers/power/reset/brcmstb-reboot.c               |  120 +++++++
 16 files changed, 900 insertions(+), 1 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
 create mode 100644 arch/arm/boot/dts/bcm7445.dts
 create mode 100644 arch/arm/mach-bcm/brcmstb.c
 create mode 100644 arch/arm/mach-bcm/brcmstb.h
 create mode 100644 arch/arm/mach-bcm/headsmp-brcmstb.S
 create mode 100644 arch/arm/mach-bcm/hotplug-brcmstb.c
 create mode 100644 drivers/power/reset/brcmstb-reboot.c

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux