This patchset is mainly used to enable the usb2 function on poplar board,
including usb2 phy drivers, dts nodes and configs.
Jiancheng Xue (3):
dt-bindings: phy-hisi-inno-usb2: add support for hisi-inno-usb2 phy
arm64: dts: hisilicon: add usb2 controller and phy nodes for poplar
board.
arm64: defconfig: enable some drivers for hi3798cv200-poplar board.
Pengcheng Li (1):
phy: add inno-usb2-phy driver for hi3798cv200 SoC
.../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 31 +++
.../boot/dts/hisilicon/hi3798cv200-poplar.dts | 13 ++
arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 60 ++++++
arch/arm64/configs/defconfig | 4 +
drivers/phy/hisilicon/Kconfig | 11 +-
drivers/phy/hisilicon/Makefile | 1 +
drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 236 +++++++++++++++++++++
7 files changed, 355 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
create mode 100644 drivers/phy/hisilicon/phy-hisi-inno-usb2.c
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
