Enable Block Data Update in hts221_probe() in order to avoid to reconfigure it every time the sensor is enabled Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@xxxxxx> --- drivers/iio/humidity/hts221_core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/iio/humidity/hts221_core.c b/drivers/iio/humidity/hts221_core.c index d2f59626b040..47a29b2da1ce 100644 --- a/drivers/iio/humidity/hts221_core.c +++ b/drivers/iio/humidity/hts221_core.c @@ -203,12 +203,6 @@ static int hts221_update_odr(struct hts221_hw *hw, u8 odr) if (i == ARRAY_SIZE(hts221_odr_table)) return -EINVAL; - /* enable Block Data Update */ - err = hts221_write_with_mask(hw, HTS221_REG_CNTRL1_ADDR, - HTS221_BDU_MASK, 1); - if (err < 0) - return err; - err = hts221_write_with_mask(hw, HTS221_REG_CNTRL1_ADDR, HTS221_ODR_MASK, hts221_odr_table[i].val); if (err < 0) @@ -644,6 +638,12 @@ int hts221_probe(struct iio_dev *iio_dev) iio_dev->name = HTS221_DEV_NAME; iio_dev->info = &hts221_info; + /* enable Block Data Update */ + err = hts221_write_with_mask(hw, HTS221_REG_CNTRL1_ADDR, + HTS221_BDU_MASK, 1); + if (err < 0) + return err; + /* configure humidity sensor */ err = hts221_parse_rh_caldata(hw); if (err < 0) { -- 2.13.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html