From: Jun Gao <jun.gao@xxxxxxxxxxxx>
The speed of sending i2c master code in high-speed mode depends on
source clock, clock-div and TIMING register. The source clock and
clock-div of different SoC are not all the same. In order to send
i2c master code at 400k in high-speed mode, a appropriate value
should be set to TIMING register for a certain source clock and
clock-div.
Signed-off-by: Jun Gao <jun.gao@xxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-mt65xx.c | 65 +++++++++++++++++++++++++++++------------
1 file changed, 46 insertions(+), 19 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 45d6171..9bedf0b 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -50,7 +50,6 @@
#define I2C_FS_START_CON 0x1800
#define I2C_TIME_CLR_VALUE 0x0000
#define I2C_TIME_DEFAULT_VALUE 0x0003
-#define I2C_FS_TIME_INIT_VALUE 0x1303
#define I2C_WRRD_TRANAC_VALUE 0x0002
#define I2C_RD_TRANAC_VALUE 0x0001
@@ -154,6 +153,7 @@ struct mtk_i2c {
bool use_push_pull; /* IO config push-pull mode */
u16 irq_stat; /* interrupt status */
+ unsigned int clk_src_div;
unsigned int speed_hz; /* The speed in transfer */
enum mtk_trans_op op;
u16 timing_reg;
@@ -285,23 +285,20 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
* less than or equal to i2c->speed_hz. The calculation try to get
* sample_cnt and step_cn
*/
-static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk,
- unsigned int clock_div)
+static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
+ unsigned int target_speed,
+ unsigned int *timing_step_cnt,
+ unsigned int *timing_sample_cnt)
{
- unsigned int clk_src;
unsigned int step_cnt;
unsigned int sample_cnt;
unsigned int max_step_cnt;
- unsigned int target_speed;
unsigned int base_sample_cnt = MAX_SAMPLE_CNT_DIV;
unsigned int base_step_cnt;
unsigned int opt_div;
unsigned int best_mul;
unsigned int cnt_mul;
- clk_src = parent_clk / clock_div;
- target_speed = i2c->speed_hz;
-
if (target_speed > MAX_HS_MODE_SPEED)
target_speed = MAX_HS_MODE_SPEED;
@@ -347,16 +344,48 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk,
return -EINVAL;
}
- step_cnt--;
- sample_cnt--;
+ *timing_step_cnt = step_cnt - 1;
+ *timing_sample_cnt = sample_cnt - 1;
+
+ return 0;
+}
+
+static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
+{
+ unsigned int clk_src;
+ unsigned int step_cnt;
+ unsigned int sample_cnt;
+ unsigned int target_speed;
+ int ret;
+
+ clk_src = parent_clk / i2c->clk_src_div;
+ target_speed = i2c->speed_hz;
if (target_speed > MAX_FS_MODE_SPEED) {
+ /* Set master code speed register */
+ ret = mtk_i2c_calculate_speed(i2c, clk_src, MAX_FS_MODE_SPEED,
+ &step_cnt, &sample_cnt);
+ if (ret < 0)
+ return ret;
+
+ i2c->timing_reg = (sample_cnt << 8) | step_cnt;
+
/* Set the high speed mode register */
- i2c->timing_reg = I2C_FS_TIME_INIT_VALUE;
+ ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
+ &step_cnt, &sample_cnt);
+ if (ret < 0)
+ return ret;
+
i2c->high_speed_reg = I2C_TIME_DEFAULT_VALUE |
(sample_cnt << 12) | (step_cnt << 8);
} else {
- i2c->timing_reg = (sample_cnt << 8) | (step_cnt << 0);
+ ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
+ &step_cnt, &sample_cnt);
+ if (ret < 0)
+ return ret;
+
+ i2c->timing_reg = (sample_cnt << 8) | step_cnt;
+
/* Disable the high speed transaction */
i2c->high_speed_reg = I2C_TIME_CLR_VALUE;
}
@@ -647,8 +676,7 @@ static u32 mtk_i2c_functionality(struct i2c_adapter *adap)
.functionality = mtk_i2c_functionality,
};
-static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c,
- unsigned int *clk_src_div)
+static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
{
int ret;
@@ -656,11 +684,11 @@ static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c,
if (ret < 0)
i2c->speed_hz = I2C_DEFAULT_SPEED;
- ret = of_property_read_u32(np, "clock-div", clk_src_div);
+ ret = of_property_read_u32(np, "clock-div", &i2c->clk_src_div);
if (ret < 0)
return ret;
- if (*clk_src_div == 0)
+ if (i2c->clk_src_div == 0)
return -EINVAL;
i2c->have_pmic = of_property_read_bool(np, "mediatek,have-pmic");
@@ -676,7 +704,6 @@ static int mtk_i2c_probe(struct platform_device *pdev)
int ret = 0;
struct mtk_i2c *i2c;
struct clk *clk;
- unsigned int clk_src_div;
struct resource *res;
int irq;
@@ -684,7 +711,7 @@ static int mtk_i2c_probe(struct platform_device *pdev)
if (!i2c)
return -ENOMEM;
- ret = mtk_i2c_parse_dt(pdev->dev.of_node, i2c, &clk_src_div);
+ ret = mtk_i2c_parse_dt(pdev->dev.of_node, i2c);
if (ret)
return -EINVAL;
@@ -745,7 +772,7 @@ static int mtk_i2c_probe(struct platform_device *pdev)
strlcpy(i2c->adap.name, I2C_DRV_NAME, sizeof(i2c->adap.name));
- ret = mtk_i2c_set_speed(i2c, clk_get_rate(clk), clk_src_div);
+ ret = mtk_i2c_set_speed(i2c, clk_get_rate(clk));
if (ret) {
dev_err(&pdev->dev, "Failed to set the speed.\n");
return -EINVAL;
--
1.8.1.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
