Hi Hugues, On 07/03/2017 11:16 AM, Hugues Fruchet wrote: > This patchset enables OV9655 camera support. > > OV9655 support has been tested using STM32F4DIS-CAM extension board > plugged on connector P1 of STM32F746G-DISCO board. > Due to lack of OV9650/52 hardware support, the modified related code > could not have been checked for non-regression. > > First patches upgrade current support of OV9650/52 to prepare then > introduction of OV9655 variant patch. > Because of OV9655 register set slightly different from OV9650/9652, > not all of the driver features are supported (controls). Supported > resolutions are limited to VGA, QVGA, QQVGA. > Supported format is limited to RGB565. > Controls are limited to color bar test pattern for test purpose. I appreciate your efforts towards making a common driver but IMO it would be better to create a separate driver for the OV9655 sensor. The original driver is 1576 lines of code, your patch set adds half of that (816). There are significant differences in the feature set of both sensors, there are differences in the register layout. I would go for a separate driver, we would then have code easier to follow and wouldn't need to worry about possible regressions. I'm afraid I have lost the camera module and won't be able to test the patch set against regressions. IMHO from maintenance POV it's better to make a separate driver. In the end of the day we wouldn't be adding much more code than it is being done now. > .../devicetree/bindings/media/i2c/ov965x.txt | 45 ++ > drivers/media/i2c/Kconfig | 6 +- > drivers/media/i2c/ov9650.c | 816 +++++++++++++++++---- > 3 files changed, 736 insertions(+), 131 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/i2c/ov965x.txt -- Thanks, Sylwester -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html