Add an edp node, and also add edp endpoints to vopb and vopl output port nodes. Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx> Signed-off-by: Caesar Wang <wxt@xxxxxxxxxxxxxx> Signed-off-by: Jacob Chen <jacob-chen@xxxxxxxxxx> --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 48 ++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index b88bd02..b4ff50a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1474,6 +1474,12 @@ vopl_out: port { #address-cells = <1>; #size-cells = <0>; + + vopl_out_edp: endpoint@1 { + reg = <1>; + remote-endpoint = <&edp_in_vopl>; + }; + }; }; @@ -1504,6 +1510,12 @@ vopb_out: port { #address-cells = <1>; #size-cells = <0>; + + vopb_out_edp: endpoint@0 { + reg = <0>; + remote-endpoint = <&edp_in_vopb>; + }; + }; }; @@ -1519,6 +1531,42 @@ status = "disabled"; }; + edp: edp@ff970000 { + compatible = "rockchip,rk3399-edp"; + reg = <0x0 0xff970000 0x0 0x8000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>; + clock-names = "dp", "pclk"; + power-domains = <&power RK3399_PD_EDP>; + resets = <&cru SRST_P_EDP_CTRL>; + reset-names = "dp"; + rockchip,grf = <&grf>; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + edp_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + edp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_edp>; + }; + + edp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_edp>; + }; + }; + }; + }; + display-subsystem { compatible = "rockchip,display-subsystem"; ports = <&vopl_out>, <&vopb_out>; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html