Re: [PATCH 1/4] thermal: imx: Add nvmem-cells alternate binding for OCOTP access

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, Jul 06, 2017 at 04:20:41PM +0300, Leonard Crestez wrote:
> On newer imx SOCs accessing OCOTP directly is wrong because the ocotp
> clock needs to be enabled first. Add a binding for accessing the same
> values through the imx-ocotp nvmem driver using nvmem-cells. This is
> similar to other thermal drivers.
> 
> The old binding is preserved for compatibility and because it still
> works fine on imx6qdl series chips.
> 
> In theory this problem could be solved by adding a reference to the
> OCOTP clock instead but it is better to hide such details in a specific
> nvmem driver.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@xxxxxxx>
> ---
>  Documentation/devicetree/bindings/thermal/imx-thermal.txt | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
> index 3c67bd5..2842a05 100644
> --- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
> @@ -7,9 +7,16 @@ Required properties:
>    is higher than panic threshold, system will auto reboot by SRC module.
>  - fsl,tempmon : phandle pointer to system controller that contains TEMPMON
>    control registers, e.g. ANATOP on imx6q.
> +
> +Properties for OCOTP access:
>  - fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON
>    calibration data, e.g. OCOTP on imx6q.  The details about calibration data
>    can be found in SoC Reference Manual.
> +Alternatively:

Just put these under required props and put the deprecated one under a 
deprecated section. IOW, make it easy to remove the deprecated part.

> +- nvmem-cells: A phandle to the calibration cells provided by ocotp.
> +- nvmem-cell-names: Should be "calib", "temp_grade".
> +
> +Direct access to OCOTP is deprecated, please use nvmem cells instead.
>  
>  Optional properties:
>  - clocks : thermal sensor's clock source.
> -- 
> 2.7.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux