On newer imx SOCs accessing OCOTP directly is wrong because the ocotp clock needs to be enabled first. Add a binding for accessing the same values through the imx-ocotp nvmem driver using nvmem-cells. This is similar to other thermal drivers. The old binding is preserved for compatibility and because it still works fine on imx6qdl series chips. In theory this problem could be solved by adding a reference to the OCOTP clock instead but it is better to hide such details in a specific nvmem driver. Signed-off-by: Leonard Crestez <leonard.crestez@xxxxxxx> --- Documentation/devicetree/bindings/thermal/imx-thermal.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt index 3c67bd5..2842a05 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt @@ -7,9 +7,16 @@ Required properties: is higher than panic threshold, system will auto reboot by SRC module. - fsl,tempmon : phandle pointer to system controller that contains TEMPMON control registers, e.g. ANATOP on imx6q. + +Properties for OCOTP access: - fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON calibration data, e.g. OCOTP on imx6q. The details about calibration data can be found in SoC Reference Manual. +Alternatively: +- nvmem-cells: A phandle to the calibration cells provided by ocotp. +- nvmem-cell-names: Should be "calib", "temp_grade". + +Direct access to OCOTP is deprecated, please use nvmem cells instead. Optional properties: - clocks : thermal sensor's clock source. -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
