On Tue, Jul 04, 2017 at 06:30:04PM +0200, Philippe CORNU wrote: > The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using > a MIPI-DSI video interface. Its backlight is managed through the DSI link. > > Signed-off-by: Philippe CORNU <philippe.cornu@xxxxxx> > --- > .../bindings/display/panel/orisetech,otm8009a.txt | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt > > diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt > new file mode 100644 > index 0000000..0bb8237 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt > @@ -0,0 +1,20 @@ > +Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode) > + > +The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using > +a MIPI-DSI video interface. Its backlight is managed through the DSI link. > + > +Required properties: > + - compatible: "orisetech,otm8009a" > + - reg: the virtual channel number of a DSI peripheral > + - reset-gpios: a GPIO spec for the reset pin (active low). (Optional) If this is optional, move it to its own section. > + > +Example: > +&dsi { > + ... > + > + panel@0 { > + compatible = "orisetech,otm8009a"; > + reg = <0>; > + reset-gpios = <&gpioh 7 0>; > + }; > +}; > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html