1. prepare top/main clk in mtk_pwm_probe() function, it will increase power consumption and in original code these clocks is only prepeare but never enabled. 2. pwm clock should be enabled before setting pwm registers in function: mtk_pwm_config(). 3. delete "pwm_disable" in function:mtk_pwm_remove(), as framework should disable all the pwms, before remove them. Signed-off-by: Zhi Mao <zhi.mao@xxxxxxxxxxxx> --- drivers/pwm/pwm-mediatek.c | 69 ++++++++++++++++++++++++++++++-------------- 1 file changed, 47 insertions(+), 22 deletions(-) diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c index d08b5b3..554a042 100644 --- a/drivers/pwm/pwm-mediatek.c +++ b/drivers/pwm/pwm-mediatek.c @@ -2,6 +2,7 @@ * Mediatek Pulse Width Modulator driver * * Copyright (C) 2015 John Crispin <blogic@xxxxxxxxxxx> + * Copyright (C) 2017 Zhi Mao <zhi.mao@xxxxxxxxxxxx> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -61,6 +62,42 @@ static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip) return container_of(chip, struct mtk_pwm_chip, chip); } +static int mtk_pwm_clk_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip); + int ret = 0; + + ret = clk_prepare_enable(pc->clks[MTK_CLK_TOP]); + if (ret < 0) + return ret; + + ret = clk_prepare_enable(pc->clks[MTK_CLK_MAIN]); + if (ret < 0) + goto disable_clk_top; + + ret = clk_prepare_enable(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]); + if (ret < 0) + goto disable_clk_main; + + return 0; + +disable_clk_main: + clk_disable_unprepare(pc->clks[MTK_CLK_MAIN]); +disable_clk_top: + clk_disable_unprepare(pc->clks[MTK_CLK_TOP]); + + return ret; +} + +static void mtk_pwm_clk_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip); + + clk_disable_unprepare(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]); + clk_disable_unprepare(pc->clks[MTK_CLK_MAIN]); + clk_disable_unprepare(pc->clks[MTK_CLK_TOP]); +} + static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num, unsigned int offset) { @@ -80,6 +117,11 @@ static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip); struct clk *clk = pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]; u32 resolution, clkdiv = 0; + int ret; + + ret = mtk_pwm_clk_enable(chip, pwm); + if (ret < 0) + return ret; resolution = NSEC_PER_SEC / clk_get_rate(clk); @@ -95,6 +137,8 @@ static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution); mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution); + mtk_pwm_clk_disable(chip, pwm); + return 0; } @@ -104,7 +148,7 @@ static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) u32 value; int ret; - ret = clk_prepare(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]); + ret = mtk_pwm_clk_enable(chip, pwm); if (ret < 0) return ret; @@ -124,7 +168,7 @@ static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) value &= ~BIT(pwm->hwpwm); writel(value, pc->regs); - clk_unprepare(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]); + mtk_pwm_clk_disable(chip, pwm); } static const struct pwm_ops mtk_pwm_ops = { @@ -156,14 +200,6 @@ static int mtk_pwm_probe(struct platform_device *pdev) return PTR_ERR(pc->clks[i]); } - ret = clk_prepare(pc->clks[MTK_CLK_TOP]); - if (ret < 0) - return ret; - - ret = clk_prepare(pc->clks[MTK_CLK_MAIN]); - if (ret < 0) - goto disable_clk_top; - platform_set_drvdata(pdev, pc); pc->chip.dev = &pdev->dev; @@ -174,26 +210,15 @@ static int mtk_pwm_probe(struct platform_device *pdev) ret = pwmchip_add(&pc->chip); if (ret < 0) { dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); - goto disable_clk_main; + return ret; } return 0; - -disable_clk_main: - clk_unprepare(pc->clks[MTK_CLK_MAIN]); -disable_clk_top: - clk_unprepare(pc->clks[MTK_CLK_TOP]); - - return ret; } static int mtk_pwm_remove(struct platform_device *pdev) { struct mtk_pwm_chip *pc = platform_get_drvdata(pdev); - unsigned int i; - - for (i = 0; i < pc->chip.npwm; i++) - pwm_disable(&pc->chip.pwms[i]); return pwmchip_remove(&pc->chip); } -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html