Hi Emmanuel, On 26 June 2017 at 22:45, Emmanuel Vadot <manu@xxxxxxxxxxxxxxxx> wrote: > On Mon, 26 Jun 2017 22:42:49 +1000 > Jonathan Liu <net147@xxxxxxxxx> wrote: > >> The LCD0 controller on the A20 can do RGB output up to 8 bits per >> channel. Add the pins for RGB888 output. >> >> Signed-off-by: Jonathan Liu <net147@xxxxxxxxx> >> --- >> arch/arm/boot/dts/sun7i-a20.dtsi | 11 +++++++++++ >> 1 file changed, 11 insertions(+) >> >> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi >> index 96bee776e145..09a0e89bed11 100644 >> --- a/arch/arm/boot/dts/sun7i-a20.dtsi >> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi >> @@ -1183,6 +1183,17 @@ >> function = "ir1"; >> }; >> >> + lcd0_rgb888_pins: lcd0_rgb888@0 { >> + allwinner,pins = "PD0", "PD1", "PD2", "PD3", >> + "PD4", "PD5", "PD6", "PD7", >> + "PD8", "PD9", "PD10", "PD11", >> + "PD12", "PD13", "PD14", "PD15", >> + "PD16", "PD17", "PD18", "PD19", >> + "PD20", "PD21", "PD22", "PD23", >> + "PD24", "PD25", "PD26", "PD27"; >> + allwinner,function = "lcd0"; >> + }; >> + > > We switch to standard pinctrl bindings so you need to use 'pins' and > 'function' (i.e. without the 'allwinner,' prefix). > Thanks, I will change it for V2. >> mmc0_pins_a: mmc0@0 { >> pins = "PF0", "PF1", "PF2", >> "PF3", "PF4", "PF5"; >> -- >> 2.13.1 >> >> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > > > -- > Emmanuel Vadot <manu@xxxxxxxxxxxxxxxx> <manu@xxxxxxxxxxx> Regards, Jonathan -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html