Update document devicetree bindings to support "wakeup-source" property. Signed-off-by: Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx> --- Changes in v3: None Documentation/devicetree/bindings/spi/spi-bus.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt index 1f6e86f..0fa1ccf 100644 --- a/Documentation/devicetree/bindings/spi/spi-bus.txt +++ b/Documentation/devicetree/bindings/spi/spi-bus.txt @@ -77,6 +77,7 @@ All slave nodes can contain the following optional properties: Defaults to 1 if not present. - spi-rx-delay-us - Microsecond delay after a read transfer. - spi-tx-delay-us - Microsecond delay after a write transfer. +- wakeup-source - Device can be used as a wakeup source. Some SPI controllers and devices support Dual and Quad SPI transfer mode. It allows data in the SPI system to be transferred using 2 wires (DUAL) or 4 -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
