v1 series[1] for dp83867 phy impedance-control support, specifies to use ti,impedance-control with a value. These properties got updated iduring review to specify whether min or max impedance. But the DT still uses the old values which never takes effect. Update the DT node by using the proper DT properties. [1] https://patchwork.kernel.org/patch/9239729/ Fixes: 9868bc585ae2c ("ARM: dts: Add support for dra718-evm") Signed-off-by: Lokesh Vutla <lokeshvutla@xxxxxx> --- arch/arm/boot/dts/dra71-evm.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index 4d57a55473af..a6298eb56978 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -190,7 +190,7 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; - ti,impedance-control = <0x1f>; + ti,min-output-impedance; }; dp83867_1: ethernet-phy@3 { @@ -198,7 +198,7 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; - ti,impedance-control = <0x1f>; + ti,min-output-impedance; }; }; -- 2.13.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html