Use gpio_is_valid() instead of gpio > -1.
Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-pca-platform.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 87ca2f02f607..3a9845bae9a4 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -197,7 +197,7 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
} else {
i2c->adap.timeout = HZ;
i2c->algo_data.i2c_clock = 59000;
- i2c->gpio = -1;
+ i2c->gpio = -ENODEV;
}
i2c->algo_data.data = i2c;
@@ -220,8 +220,7 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
break;
}
- /* Use gpio_is_valid() when in mainline */
- if (i2c->gpio > -1) {
+ if (gpio_is_valid(i2c->gpio)) {
ret = gpio_request(i2c->gpio, i2c->adap.name);
if (ret == 0) {
gpio_direction_output(i2c->gpio, 1);
@@ -255,7 +254,7 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
if (irq)
free_irq(irq, i2c);
e_reqirq:
- if (i2c->gpio > -1)
+ if (gpio_is_valid(i2c->gpio))
gpio_free(i2c->gpio);
iounmap(i2c->reg_base);
@@ -277,7 +276,7 @@ static int i2c_pca_pf_remove(struct platform_device *pdev)
if (i2c->irq)
free_irq(i2c->irq, i2c);
- if (i2c->gpio > -1)
+ if (gpio_is_valid(i2c->gpio))
gpio_free(i2c->gpio);
iounmap(i2c->reg_base);
--
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
