From: "Andrew F. Davis" <afd@xxxxxx> The DSPs are expected to be in reset when the driver probes a device. If the DSPs are out of reset in probe, the system may crash when the firmware is being loaded. So, add a check to make sure the DSP resets are asserted, and if not, throw a eye-catchy warning and assert the resets specifically. Signed-off-by: Andrew F. Davis <afd@xxxxxx> [s-anna@xxxxxx: replace warning with a WARN] Signed-off-by: Suman Anna <s-anna@xxxxxx> Acked-by: Santosh Shilimkar <ssantosh@xxxxxxxxxx> --- v3: No code changes, picked up Santosh's Ack v2: https://patchwork.kernel.org/patch/9773679/ drivers/remoteproc/keystone_remoteproc.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/remoteproc/keystone_remoteproc.c b/drivers/remoteproc/keystone_remoteproc.c index 6e09ef76f7c7..5f776bfd674a 100644 --- a/drivers/remoteproc/keystone_remoteproc.c +++ b/drivers/remoteproc/keystone_remoteproc.c @@ -456,6 +456,16 @@ static int keystone_rproc_probe(struct platform_device *pdev) if (of_reserved_mem_device_init(dev)) dev_warn(dev, "device does not have specific CMA pool\n"); + /* ensure the DSP is in reset before loading firmware */ + ret = reset_control_status(ksproc->reset); + if (ret < 0) { + dev_err(dev, "failed to get reset status, status = %d\n", ret); + goto release_mem; + } else if (ret == 0) { + WARN(1, "device is not in reset\n"); + keystone_rproc_dsp_reset(ksproc); + } + ret = rproc_add(rproc); if (ret) { dev_err(dev, "failed to add register device with remoteproc core, status = %d\n", -- 2.13.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html