Hi Tony, 2017-06-13 9:35 GMT+02:00 Tony Lindgren <tony@xxxxxxxxxxx>: > * Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> [170612 14:28]: >> The interrupt for power button is static data that comes from the >> datasheet, there is no reason to need to define this value on every >> board so seams reasonable put this information into the common tps65217 >> file. > > I think there's a problem with these patches where we no longer know > if the interrupts are wired up on a board. For example, if the USB PHY > VBUS interrupt is not connected, the phy driver needs poll the > cable state. > Hmm, the tps65217 doesn't have a USB PHY like others tps, so not sure how could affect this patch. Did you see this issue in any board that uses tps65217 or any am335x based board which commonly uses this pmic? > And on some PMICs some pins can be muxed to GPIO mode, don't > remember if that can be done with tps65217. > i don't think this is the case of the boards that use tps65217 as the pins can't be muxed to GPIO mode. > Regards, > > Tony Regards, Enric -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
