* Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> [170612 14:28]: > The interrupt for power button is static data that comes from the > datasheet, there is no reason to need to define this value on every > board so seams reasonable put this information into the common tps65217 > file. I think there's a problem with these patches where we no longer know if the interrupts are wired up on a board. For example, if the USB PHY VBUS interrupt is not connected, the phy driver needs poll the cable state. And on some PMICs some pins can be muxed to GPIO mode, don't remember if that can be done with tps65217. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html